Part Number: TMP302-Q1 Other Parts Discussed in Thread: TMP302 Hi there
We are looking at using the TMP302C in an application providing thermal (over temperature) safety protection - its very attractive for this due to its precise temperature accuracy…
Other Parts Discussed in Thread: TMP302 Hi all Would you mind if we ask TMP302? Is it possible to change the setting of TRIPSET0 and TRIPSET1 after Vs on(supplied 3.3V)? Our customer would like to change the threshold of detection temperature at a few…
Other Parts Discussed in Thread: TMP302 Hello, all
I would like to ask you regarding the definition of output logic level on TMP302.
On page 3 of the datasheet of this device, only VOL is defined as "0 to 0.4" (VS > 2V) or "0 to 0.2*VS" (VS < 2V)…
Part Number: LM3940 Other Parts Discussed in Thread: TMP302 , TLV755P I have a few questions about a design I'm creating using the LM3940 voltage regulator to power the TMP302 temperature switch.
The first question is very straightforward. For the…
Part Number: LM96063 Other Parts Discussed in Thread: TMP390 , TMP302 Hello, is there a programmer available that can be used to program the LM96063? Also, what software would be needed? The goal is to externally program the fan controller once. Thanks…
Abhilash,
If you're only using TMP102 as a thermal shutdown, you might find a TMP302 or TMP303 that meets your needs. You can also purchase TMP116, which has EEPROM, and configure your desired limit once in your production. From then on, TMP116 will…
Hi Yaita,
(1) Correct. Since ambient temperature was kept above trip point all the time. OUT pin will keep its tripped state. Only if the ambient temperature drops below trip point plus hysteresis, the OUT pin resets (to HIGH).
(2) In general you…
Hi Cafain-san,
Not a problem, and you don't have to say "sorry". I understand it now!
Unfortunately, customer can't leave these pins floating. TMP302 is continuously monitored the TRIPSETx pin after power up. Floating these pins can cause the OUT_bar…
Hi Vera,
TMP116 is our only device with I2C interface and EEPROM for its settings. TMP107 is another local temperature sensor which has EEPROM, but the interface is UART. You might consider using one of our switch products, such as TMP302, which offer…
