Part Number: TMP61 Hi Team,
I want to confirm if there is any small package of TMP61 will be pushed such as DYY, DDF, DDC... And could you share the small package information and RTM time if we have. Thanks.
Best Regards,
Ryker
Part Number: TMP61 We are currently using an off the shelf 10K NTC thermistor as shown below. The thermistor uses a strap that is clamped around a metal pipe which we measure temperature across. We would like to replace this with the TI TMP61. Our belief…
Part Number: TMP61-Q1 Other Parts Discussed in Thread: TMP61 Team, I'm designing on the Temp sensor Acquistion circuit. Been studying on different designs for a while. Mind is foggy now. Please guide.
www.ti.com/.../sboa506.pdf
p/n: TMP6131QLPGQ1 …
Part Number: TMP61-Q1 Other Parts Discussed in Thread: TMP63-Q1 , TMP64-Q1 Dear BU,
My customer used TMP61-Q1 and they want to know how to change the Rbias. Does it settle down by 10Kohm or could customer change to other value.
Part Number: TMP61-Q1 Other Parts Discussed in Thread: TMP61 , INA351 , TLV9062
Hello TI E2E Community,
I am currently working on a temperature-sensing application using the TMP6131ELPGMQ1 linear thermistor from Texas Instruments. The TMP61 sensors…
Part Number: TMP61
Customer doesn`t know if parts are soldered correrctly.
Is the measurable diode path mounted in forward/blocking direction?
They assume that the very small dot (very hard to recognize, upper right) is pin 1
And pin 1 hast to be connected…
Part Number: TMP61-Q1 Other Parts Discussed in Thread: ISOTMP35 How to mount Temperature sensor part no as TMP 61-Q1 near MOSFET on PCB , what kind practice we should follow to mount that temperature sensor near to MOSFET?
Can we get proper guidelines…
Part Number: TMP61
Does the TI Thermistor Design Tool allow the use of lower order polynomials?
Does the TI Thermistor Design Tool provide expected min and max temperature error for the condition of using “nominal fixed values for polynomials”, Rbias…
Part Number: TMP61 The customer want to use TMP6131DYAR.
Could you pls tell me how to distinguish the polarity？
The silk does not seem to match the description in datasheet.
1GK is not in the half area.
Part Number: TMP61-Q1 Other Parts Discussed in Thread: LP-MSPM0L1306 Before wheel reinvention, I wondered if anyone had code, equation or data on the LP-MSPM0L1306 TMP6131 that would calculate temperature?
