Search tips
Showing 28 results View by: Thread Post Sort by
    Answered

  • TMP708-Q1: How many times TMP708 requires a response from the target temperature sensed to /OT = Low?

    Resolved
    Part Number: TMP708-Q1 Other Parts Discussed in Thread: TMP708 Tool/software: Hi We plan to place the thermal sensor as TMP708 near the power MOSFET and use the /OT to stop the current flowing as protection. The power dissipation across the power…
    • Resolved

  • TMP708: Do we have this kind of temperature switch support remote NTC?

    TI Thinks Resolved
    Part Number: TMP708 Tool/software: Hi team, Do we have this kind of temperature switch support remote NTC? Thanks! Jayden Li

  • TMP708-Q1: TMP708-Q1 behavior is not correct at power cycling test in high temp

    Part Number: TMP708-Q1 Other Parts Discussed in Thread: TMP708 , TMP390-Q1 Hi Sir, I suffered TMP708-Q1 not correct behavior in high temp ambient. Trip temp is set by 105 degree. Can you guide me to have a debug? Can you tell you can see the attached…

  • TMP708: RSET parallel with capacitor

    TI Thinks Resolved
    Part Number: TMP708 Hi Team Customer wants to know if RSET can be paralleled with a 2.2nF cap? Will it cause any potential problem? Thanks! Andrew
    • Answered

  • TMP708: SET Voltage Trip Threshold

    Resolved
    Part Number: TMP708 Hi Team, My customer is planning to test the TMP708 in production by driving the SET pin with an external voltage. Can you please share the trip threshold voltage for the SET pin? Reading through the datasheet, the references seem…
    • Resolved

  • TMP708: hardware-controlled temperature cut-off circuit?

    TI Thinks Resolved
    Part Number: TMP708 Other Parts Discussed in Thread: LM26 , TMP61 , , LM56 , TMP61-Q1 Team, The goal is to design an hardware-controlled temperature cut-off circuit. I have checked already the "chap.6 How to protect control systems from thermal damage…

  • TMP708: Precision

    TI Thinks Resolved
    Part Number: TMP708 Hi, I'm using TMP708 as temperature switch. The Rset is 20k which means that the temperature threshold is about 93 degree. But when the temperature reaches up to 80 degree, the OT pin will output low and trigger the system. When…

  • TMP708: OT connects to Soft Start pin

    TI Thinks Resolved
    Part Number: TMP708 Other Parts Discussed in Thread: LM5025 , Hi team customer connects OT pin to LM5025 SS pin, that pin is a current source, and there is no external pull up resistor, is this ok to design like this? Thx. Andrew

  • TMP708-Q1: Temperature Threshold Accuracy at 105C

    TI Thinks Resolved
    Part Number: TMP708-Q1 Hi Team, The TMP708-Q1 temperature threshold accuracy is specified from 60C to 100C. My customer would like to use the device with a threshold of 105C and they need to do worst-case analysis. Do we have accuracy numbers for a…

  • TMP708: temperature threshold is set at 25~30 degrees C

    TI Thinks Resolved
    Part Number: TMP708 Other Parts Discussed in Thread: TMP390 Please tell me about the use of the hysteresis selection function. I am not very clear about its usage. (1) If my temperature threshold is set at 25~30 degrees C, should my hysteresis be set…

Didn't find what you are looking for? Post a new question.