Part Number: TMP75-Q1 Hello team, my customer is using the TMP75-Q1 and would like to understand the timing between the temperature crossing the threshold and the output on the Alert pin. Thanks for your help.
Part Number: TMP75-Q1 Other Parts Discussed in Thread: TMP75 , TCA9548A ==========
open new case, because pervious one closed by incorrect operation
all message are copy from pervious ticket
==========
Part Number: TMP75-Q1 Other Parts Discussed in Thread: TMP75 , TCA9548A Dear,
In our design(diagram below), we have 2 TMP75-Q1 and one sensor with PEC(Packet Error Checking) function support.
When we write 0x94 value data(PEC enabled) to the 0x03 register…
Part Number: TMP75-Q1 Other Parts Discussed in Thread: TMP75B , TMP1075 Hi Sir,
May I know if we have MCU driver(SMT32 or Infineon) for TMP75-Q1?
I only see linux driver in product folder.
Thank you.
Regards,
Allen
Part Number: TMP75-Q1 Hi TI expert
I looked the datasheet and it was unmarked ADAS information,please tell me whether TMP75AQDGKRQ1 is used for ADAS application and ADAS products (QM/A/B/C/D) is QM?
Thanks
Jacob
Part Number: TMP75C-Q1 Other Parts Discussed in Thread: TMP75 , TMP75C Tool/software: I'm using TMP75 to measure PCB temperature and it's accurate when the device is in open air but when the pcb is in its plastic enclosure and is fully potted its now reading…
Part Number: TMP75-Q1 Other Parts Discussed in Thread: TMP75 Hi, we are using a couple of TI temperature sensors, e.g. TMP75AQDGKRQ1, for a safety critical design. I currently investigate how far soft errors in the configuration registers of such devices…
Part Number: TMP75-Q1 Hi TI-team
The datasheet states that the VIH is 0.7 (V+) to 6V.
6V:Why would it be a higher voltage than V+? (V+=2.7 to 5.5V)
What does it mean to be 0.7(V+) ?
I can understand 0.7, but I don't understand 0.7 (V+).
Best Regards…
Part Number: TMP75B-Q1 Other Parts Discussed in Thread: TMP100-Q1 , TMP75-Q1 Hi team,
It is described in TMP100-Q1 datasheet as below that General call reset is required if supply voltage
is not sure to be <0.3V.
#1. Does it also apply for TMP75-Q1 device…
