Part Number: TMS320C28345 Other Parts Discussed in Thread: C2000WARE , SYSCONFIG I am using TMS320F28P650DK9 ControlCard as the development platform with CCS 20.4 as the IDE.
Also, my reference is https://software-dl.ti.com/C2000/docs/C2000_Multicore_Development_User_Guide…
Part Number: TMS320C28345 Other Parts Discussed in Thread: CONTROLSUITE Dear Team,
I hope this message finds you well.
We are currently in the process of implementing the FOC algorithm using the C2000 MCU. In our design, we have opted for a low side…
Part Number: TMS320C28345 Other Parts Discussed in Thread: SYSCONFIG , SYSBIOS I am attempting to update a C2000 project (TMS320C28345) from CCS4 and DSP/BIOS to CCS10 and SYS/BIOS.
My project builds and loads on the hardware, then hits a breakpoint…
Christopher Chiarella said:
Hello
The flash likely contains the code you flashed via JTAG previously before attempting the SCI loader.
Best regards
Chris
Hello
I have resolved my questrion by myself! Thank you all the same! There's something…
Part Number: TMS320C28345 Hi, my customer need the launchpad or controlcard to test C28345. But there's no such EVM for this device, so I think C28346 may be the replacement. But
TMDSCNCD28346-168
is obsolete on ti.com. And i'm not sure if this one…
Other Parts Discussed in Thread: TMS320C28345 Hello,
I use a TMS320C28345 and I have a problem with CCS ; in fact, I'm using an 256kB external memory and I'd like to load a program of 250kB in it.
With my techniques, I need to put a table of data…
Hello, i have a problem with the ePWM modul, it is losing the sync from the master module. The working frequency is changing between 10kHz and 200kHz. The phase shift has to be changed to the new frequency. It works better if i do not use the shadow registers…
Other Parts Discussed in Thread: TMS320C2834X ALL,
TMS320C2834x without inner Flash, it use external EEPROM or Flash, If TMS320C2834x boot from external EEPROM(such as 24LC512), we need to update application program use serial port through UART port…
