Part Number: TMS320C6205 Hello team,
One of my factory automation customer have an old PCI platform which is developed using TMS320C6205 have an issue regarding PCI driver loading between C6205 customer board and Desktop PC.
Sometimes, the issue causes…
Other Parts Discussed in Thread: XIO2001 Hi
We have a series of products (sound cards) based on the C6205 DSP. We use the PCI interface. These products have performed reliably in all motherboards we have tested with for over 7 years.
Recently we have…
Hi,
You should submit a request to the PE team for this information.
Please see this e2e thread: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/746506/tms320c6205-esd-rating-of-tms320c6205dzhka200/2762811#2762811
Regards, Fr…
Other Parts Discussed in Thread: TMS320C6205 Hi, expert:
I am using CCS5 to develope the software for TMS320C6205. I downloaded the CSL for 6x series dsp, but I donot know where to set the chip type. I can only choose the generic 62xx, and cannot further…
Other Parts Discussed in Thread: TMS320C6205 , XIO2001 Hi
We have a series of PCI products based around the TMS320C6205+TMS320C6713. We created PCIe versions by adding an XIO2001.
Lately we have seen issues when trying to run the XIO2001 based products…
The cache line size is set to 4. (Why?) The TMS320C6205 Errata document says that it must be greater than 4, otherwise, memory read line commands (which are likely to be used for prefetching) will fail.
There are a bunch of other possible PCI bus errors…
Hi,
Please refer to the link given below.
http://focus.ti.com/lit/ds/symlink/tms320c6205.pdf
Here, go through the architecture of C6205 (Page7), you will find Master/Slave PCI interface. So, i guess it can act as master and slave both.
Hope this…
Uri,
My first recommendation is to check the errata for the device to see if there is anything mentioned there about something like this. I doubt that is the case, but it is always the best first place to start. You can find the errata document at the…
Jianjie, here is what I found in the support archive:
If PCI is not used in your design you need to look at the following. You still need to double check with both the PCI user's guide - SPRU642 and the C6205 datasheet:
1) To save some power you…
