Part Number: TMS320F280049 Hello,
In case of a nested interrupt in the same group, we have observed a possibility that the interrupt does not return to the previous interrupt (which it was servicing) after servicing the nested interrupt.
Part Number: TMS320F280049 Other Parts Discussed in Thread: SYSBIOS Hi,
I have an interesting problem with the CAN controller on a F280049. I am using CAN controller 'A' connected using GPIO32 and GPIO18. Using the CAN controller without loopback I get…
Part Number: TMS320F280049 Hello, is it allowed to set CMPAHR > TBCLK?
Further my customer has problem to set the CMPAHR to 255. Then the PWM falling edge flipped back to the position where the HR value is equal 0.
Part Number: TMS320F280049 Hi ,
I have a design in which I wish to use the internal reference I have the following code to configure Vref to 2.5V:-
ADC_setVREF(ADCA_BASE, ADC_REFERENCE_INTERNAL, ADC_REFERENCE_2_5V); ADC_setVREF(ADCB_BASE, ADC_REFERENCE_INTERNAL…
Part Number: TMS320F280049 Other Parts Discussed in Thread: TIDA-01606 Hi team,
here is a confusing item about our C2K code library: SPLL_1PH_SOGI
And they is a step park transform in : https://www.ti.com/lit/an/sprabt3a/sprabt3a.pdf
And from my knowledge…
Part Number: TMS320F280049 Other Parts Discussed in Thread: C2000WARE Hello,
I want to know if I need to call the SysCtl_deviceCal when I run my debugger with a flash config. The documentation of the driver lib says:
#ifndef _FLASH // // Call Device_cal…
Part Number: TMS320F280049 Dear Champs,
I am asking this for our customer.
The user wants to use assembly for their codes in CLA.
__asm (" PUSH MAR0");
__asm (" PUSH MR0");
do not work on CLA .cla files.
__asm (" PUSH…
Part Number: TMS320F280049-Q1 Hi All,
in table 6.1, section Power and Ground of the datasheet is written:
VDD --> TI recommends placing a decoupling capacitor near each VDD pin with a minimum total capacitance of approximately 20 µF. (pg.26 datasheet…
Part Number: TMS320F280049 Other Parts Discussed in Thread: C2000WARE , SYSCONFIG Hi,
So I'm a complete newbie to the C2000 series, I normally reside in the TM4C1294 camp. But for one project the F280049 seemed a nice fit. The System config tool appeared…
Part Number: TMS320F280049 The ADC conversion time (including S&H and conversion) in the data sheet (Table 5-1, 290ns, 3.45MSPS).
The datasheet also says that the ADC conversion cycles is 11 ADCCLK cycles with ADCCLK = 100 MHz sysclk. Does this mean…