Part Number: TMS320F28033 Other Parts Discussed in Thread: TMS320F28035 Hi team,
Due to supply issue, my customer want to use TMS320F28035 replace TMS320F28033, I see at datasheet they have different flash, Apart from this difference, what other differences…
Part Number: TMS320F28033 Hi,
Recently, I start to work on the arc detection. I am new. Is there some exemplary projects or libraries for the arc detection? Are they still available for downloading?
Thanks a lot.
Part Number: TMS320F28033 Other Parts Discussed in Thread: TEST Hi expert,
I have a customer want to test power drop down situation.
So they turn down the power from 3.3V to 2.8V.
I know the it is already lower than our recommended voltage.
At about 2…
Part Number: TMS320F28033 Dear Champs,
I am asking this for a customer.
The user wants to use 48-pin F280033SPT, but because sample availability, they can only use superset F280037CSPT.
Therefore, they are asking if they can develop codes on F280037CSPT…
Part Number: TMS320F28033 Other Parts Discussed in Thread: C2000WARE Is there any documentation available for the FFT32_calc() function mentioned in: C28x_Fixed_Point_Library_v1_01.pdf?
Part Number: TMS320F28033 Hi expert,
I have a customer meet similar issue like this post.
The device is F28033. It is occasionaly happened.
They also stuck at PLLLOCKS status check
they also use external oscillator. so they check the oscillator waveform…
Part Number: TMS320F28033 Hi team,
My customer use F28033 in their LLC power supply.
They set the software frequency limit to 70kHz, but in some special situation the real EPWM output frequency is lower 70kHz to minmax 50kHz.
Customer want to identify…
Part Number: TMS320F28033 Other Parts Discussed in Thread: TMDSEMU200-U
Issue in Configuring TMS320F28033 in UniFlash I'm experiencing some problem on programming TMS320F28033, and the debugger is Texas Instruments XDS2xx USB Debug Probe.
In UniFlash…
Part Number: TMS320F28033 Other Parts Discussed in Thread: C2000WARE Hi team,
The customer have tried if can use the printf function to output a variable, and referring to the following threads on e2echina forum:
https://e2echina.ti.com/support/microcontrollers…