Part Number: TMS320F28054 We have a working motor control program and a corresponding assembled PCB. Our boards have been built with TMS320F28054 device as the motor controller. When we run the program under the debugger, the program works well. But when…
Part Number: TMS320F28054 Other Parts Discussed in Thread: MOTORWARE Hi,
Good Day. I have a customer who is migrating the firmware based on F28054 to F28049C. Can he use the same libraries for the F2049C? Please advise. Thank you very much.
Best Regards…
Part Number: TMS320F28054 Tool/software: Code Composer Studio What is the meaning of error ?
subdir_rules.mk:100: recipe for target 'lab5f_1.obj' failed
What are the best ways to tackle it?
Part Number: TMS320F28054 Tool/software: Code Composer Studio Dear team
My customer is using TMS320F28054. ADCINB4 (op-amp) was used as ADC input channel.
It worked fine When used in normal temperature and high temperature.
But the feedback temperature…
Part Number: TMS320F28054 Hi,
We are using the TMS320F28054FPNT and a number of analog inputs have a PGA that cannot be bypassed
Is there a way to disable the PGA or set it to a gain of 0dB (1x)
Part Number: TMS320F28054 Hi,
One of my customer met the problem when downloading program by using JTAG interface. three of five chips downloading failed.
they tried many times after power off, but still unsuccessful .
I mean is there any special…
Part Number: TMS320F28054M Other Parts Discussed in Thread: MOTORWARE I used lab 2b to get the values of PMSM motor resistance as 0.32ohm and inductance (d and q) as 0.00092 Henry ans 0.064 as back emf constant. However, if I use these parameters, 2 out…
Part Number: TMS320F28054 Running the InstaSpin- FOC with an ACIM, during the RS stage, the result of the Rhf is negative. That doesn't sound right to me. please assist.
Part Number: TMS320F28054 Other Parts Discussed in Thread: CONTROLSUITE Tool/software: Code Composer Studio I want to port code of app note SPRABN7 to f28054 processor. For that can I get project of lab SPRABN7 to modify?
Part Number: TMS320F28054 Hi,
It seems there is a standard way that industrial manufacturer's of PMSM follow when aligning incremental encoders on motors. They align the encoder module to the motor so that the index pulse and U-hall falling edge aligns…
