Part Number: TMS320F28062F Other Parts Discussed in Thread: TMS320F28062 Hi,
I am using programmer (XDS110). I used the below connections with Microcontroller board. We powered up the board using JTAG power. For programming we are using Code Composer…
Part Number: TMS320F28062F Other Parts Discussed in Thread: TMS320F28066 Tool/software: Hi,
I'm in charge of design and program 3 phase inverter for embeded PMSM motor apliccation.
I have an issue regarding non sinusoidal phase current whih looks…
Part Number: TMS320F28062F
As the red arrow points to the image below， TMS320F28062F have a build-in POR/BOR/OVR。When POR/BOR/OVR happen，the Supervisor reset release delay 400us-800us. therefore,Is necessary to add a additional reset IC to ensures…
Part Number: TMS320F28062F Other Parts Discussed in Thread: C2000WARE I used both CAN receive interrupt (INT9.5) and ADC interrupt (INT1.1) in motor control project. I now want to prioritize ADC interrupt execution if it occurs during CAN interrupt execution…
Part Number: TMS320F28062F Hi Team,
How to upgrade the motor control application developed based on F2806xF solution: instaspin_foc (proj_lab03a) to solution: universal_motorcontrol_lab (f28002x). What changes need to be made in the software part and…
Part Number: TMS320F28062F Other Parts Discussed in Thread: DRV8305 Hi Team,
There's a question from the customer need your help:
When using instaspin-foc, must I use a driver IC such as DRV8343 or DRV8305?
Thanks & Regards,
Ben
Part Number: TMS320F28062F
Hi,
C2000 ADCs are accompanied with Post Processing Blocks that are capable of zero-crossing detection which can off-load some calculation burden from the CPU. However, I'm not sure about the reliability of the PPB with…
Part Number: TMS320F28062F Hi TI Experts,
A question on usb_dev_serial example from C2000_Ware (V4.02). The example targets 28069 device, and I had some trouble when tring to target my 28062F device.
I imported the example to CCS12.1 workspace, specify…
Part Number: TMS320F28062F Hi team,
Here's an issue from the customer may need your help:
The initial problem was that pending was not set to 1, but after checking it was found this was because mailbox 18 did not set the ID correctly because a 32…
Part Number: TMS320F28062F Other Parts Discussed in Thread: TIDM-2PHILPFC , TIDM-1022 , C2000WARE
Hi,
My customer is developing based on the TIDM-2PHILPFC.
He want to detect zero crossing of AC input.
Is there any reference or examples to detect…
