Part Number: TMS320F28068M Other Parts Discussed in Thread: MOTORWARE
Hello,
I've been attempting to use SCI routines native to Motorware, and shoehorn them into InstaSPIN lab 05b.
Their presence seems to be tolerated by the original Instaspin code…
The shortest start/stop time depends on the control algorithm (sensored or sensorless), the inertia and friction of the system, the adding load of the motor, the required performance of the system. There is no fixed value, the start/stop time you mentioned…
Part Number: TMS320F28068M In example C:\ti\c2000\C2000Ware_1_00_06_00\device_support\f2806x\examples\c28\external_interrupt There is a part where they "connect XINT1 and XINT2 to Group 1 with interrupt 4 and 5". As there are 96 interrupts sources available…
Part Number: TMS320F28068M I want to know the level of the digital input signal.
With eCAP, I can only see the rising and falling edges.
What are the possible options and how to use them.
I haven’t heard back from you for a week, I’m assuming you were able to resolve your issue. If not, just post a reply below, or create a new thread if the thread has locked due to time-out. Thanks.
Hello Yanming-san,
I took the waveforms as follows;
As I mentioned before, Max accel is already max vale and although I tried to increase Jerk value, the startup of motor was still failed.
PMSM Motor Pole pair: 6
Max RPM: 6500 rpm
…
Part Number: TMS320F28069M Other Parts Discussed in Thread: TMS320F28068M Respected sir,
I am working on TMS320F28069M. I need the technical reference manual for that but I am unable to find that.
I found the "TMS320F28069M, TMS320F28068M InstaSPIN…
Part Number: TMS320F28069 Requesting for a certificate of volatility for this microcontroller part (TMS320F28069PZPS), attached datasheet for your reference.
tms320f28069.pd.pdf
Andrea,
Sure, C2000 could be used. I know several customers using for applications just like this, keeping locked on a satellite while the vehicle is in motion.
what sort of rotor sensors do you have available? Hall or encoder?
you will be doing…
