The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.



Search tips
Showing 94 results View by: Thread Post Sort by

  • TMS320F2809: TMS320F2809, differences PZQ and PZS

    TI Thinks Resolved
    Part Number: TMS320F2809 Hello, what is the difference between TMS320F2809PZQ and TMS320F2809PZS? other than the marking on the IC they appear to be identical thanks

  • RE: TMS320F2809: I2C module ARDY or STOP interruption?

    Hi Andrias, Andrias Pauda said: Yes, after the breakpoint I checked in the oscilloscope (screen from post on Sept 5) and I’m having a NACK and then a STOP. Even 100 ns after the breakpoint the registers still: I2CSTR.NACK=1, I2CSTR.SCD=1 and I2CSTR.BB…
    • Answered

  • TMS320F2809: Manufacturing time.

    Resolved
    Part Number: TMS320F2809 Other Parts Discussed in Thread: TMS320F280039C Hello, We are a medical equipment manufecturer and we use the TMS320F2809 in our control boards. It is an "old" microcontroler, so we would like to know if you have a forecast…
    • Resolved

  • TMS320F28027: TMS320F2809

    Part Number: TMS320F28027 Other Parts Discussed in Thread: TMS320F2809 I have the same issue. The device is held in reset. I have my custom board using the TMS320F2809 This is a new board but from the same batch that I have programmed before. where should…

  • TMS320F2809: download procedudre

    Part Number: TMS320F2809 Other Parts Discussed in Thread: UNIFLASH I have a custom board where I use the TMS320F2809 DSP. I have the spectrum digiral XDS510LC USB JTAG emulator from past. I have the SD config uti;ity installed on my laptop and also the…
    • Answered

  • TMS320F2809: Different between RAMMx and RAMLx

    Resolved
    Part Number: TMS320F2809 Dear team: I want to know the difference between the two RAM areas? For example： 1, If the usage rate of my RAML0 area is close to 100%, can I put some "ramfuncs" code or some ". ebss" code into RAMM0 and RAMM1?…
    • Resolved
    • Answered

  • TMS320F2809: A list of JTAG tools available in CCS v3.3

    Resolved
    Part Number: TMS320F2809 Hi, Is there a list of JTAG tools available in CCS v3.3? My customer is developing using CCS 3.3, but the JTAG tool broke and they plan to buy a replacement JTAG. I want to know the JTAG available in CCS 3.3. Best regards, Sasa…
    • Resolved
    • Answered

  • TMS320F2809: About the use of the % operator

    Resolved
    Part Number: TMS320F2809 Dear team: Does my client want to know what special requirements CCS6.2 has for % operation? He found that the results were not what he expected after programming the following: Uint16 eshCNT = 0; Uint16 yu=0; void Fun(){…
    • Resolved
    • Answered

  • TMS320F2809: Question about Peripheral Frame 0

    Resolved
    Part Number: TMS320F2809 Dear team: In the ADC documentation Page 44, there are the following: In the cascaded sequencer mode, registers ADCRESULT8 through ADCRESULT15 holds the results of the ninth through sixteenth conversions. The ADCRESULTn registers…
    • Resolved

  • TMS320F2809: Using XDS110 to read TMS320F2809

    TI Thinks Resolved
    Part Number: TMS320F2809 Hi Team, We have a customer trying to read the TMS320F2809 on a custom board using XDS110. Upon checking the product page of TMS320F2809, the XDS110 is not included in the list of debug probe. However, other devices in the TMS320…

Didn't find what you are looking for? Post a new question.