Part Number: TMS320F28334 Other Parts Discussed in Thread: C2000WARE Hi Guys, man I have not been here in a while.
Anyway, I'm starting a new project using the TMS320F28334 which I will be receiving a few chips in a few days, so I thought I'd get CCS…
Part Number: TMS320F28334 I am using a FT2232D USB Interface to program the flash on the on-board TMS320F28334. I can connect using CCS on my laptop but get an error when using another computer.
The message is:
Error connecting to the target
Error 0x80000240…
Part Number: TMS320F28334 GPIO pins 84,85, 86 & 87 are connected to 3.3v through 22k pullup resistors. The system always boots properly from the emulator, but with the emulator disconnected and cycling power, sometimes it boots and sometimes not. …
Part Number: TMS320F28334 I am using GPIO20 thru GPIO24 and GPIO50 thru GPIO58 as inputs. They are all configured as inputs,and all work properly with the exception of GPIO22 & GPIO52. Is there something different about thes two GPIUO points?
Part Number: TMS320F28334 Hi,
I’m using the “Blackhawk USB560v2 System Trace Emulator” to CCS (version is 6.1.3) for debug, the target board is our custom product and the DSP chip is TMS320F28334. Currently I ran into a problem when…
Part Number: TMS320F28334 Dear Sir ,
we have old product that use the c2000 TMS20F28334ZAYA , due to component shortage can we use TMS20F28335ZAYA instead
without changing the software (it have the same pinout / functionality ) , the only difference i…
Part Number: TMS320F28334 Other Parts Discussed in Thread: C2000WARE Hello Guys,
Good day.
Our customer is using CCS v3.3 on TMS320F28334. Is there a piece of software that they can install in their panel PC that will connect permanently via USB cable…
Part Number: TMS320F28334 I am working on TMS320F28334 and i am configuring the TRIP signal event for ePWM1A and ePWM1B. During the trip signal event i will enable bits such that ePWM1A will go low and ePWM1B will go high .
The question is which of them…
Part Number: TMS320F28334
Imagine i configured the ePWM1A and configured ePWM1B be complimentary of ePWM1A.
Question 1
if i set the bits such that during Trip Signal event ePWM1A pin to be low. what would be state of ePWM1B pin during trip signal event…
Part Number: TMS320F28334 Other Parts Discussed in Thread: TMS320F28379D , TMS320F28388D
Number: CS0308807: Advice about DSP selection
I need to select a DSP for our future magnetic bearing controllers of our own manufacture and design and programming…