Part Number: TMS320F28376S Other Parts Discussed in Thread: C2000WARE , TMS320F28069 Dear sir,
I am using TMS320F28376S controller. In this controller i am trying to flash the code through Serial flash programmer. When I gave the command it is showing…
Part Number: TMS320F28376S Hi, I am trying to connect to the F28376S through JTAG to program it and debug. Unfortunately we have faced many errors, including the usual:
C28xx: Error connecting to the target: (Error -1135 @ 0x0) The emulator reported an…
Part Number: TMS320F28376S Hello, On the Launchpad, we have been managing very easily to generate 200kHz waveforms in the PWM module. We have designed our own board, but could only get the single core version in stock - but it is suffice for our requirements…
Hi Ki
thank you for your reply and sorry for the delayed response. I'm wondering, because at my colleagues it works and as far as I know, they use 12.1 and 12.3. But I'll give it a shot.
Best regards, Robert
Part Number: TMS320F28376S Hi all
My application terminates when Task_restore is called within the Task_sleep method of the SYS/BIOS (6.83.0.18). I opened another thread which handles this issue in more detail. Within this thread I just would ask general…
Part Number: TMS320F28376S Other Parts Discussed in Thread: C2000WARE , Dear Developers
We have implemented DMA which transfers the results from the SPI A Receive buffer into a 16 words array in the RAM. Doing this, we try to pseudo parallel our system…
Part Number: TMS320F28376S Other Parts Discussed in Thread: LAUNCHXL-F28379D Hello,
Can I use 3.3V ref at VREFHI of TMS320F283* ?
I mean then I will have sampling range 0V-3.3V or MCU is reducing sampling range to 0V-3V ?
It's not clear from datasheet…
Part Number: TMS320F28376S Other Parts Discussed in Thread: C2000WARE I want to be able to use the USB to update firmware directly. Is there a USB bootloader application available?
Part Number: TMS320F28376S Dear Sir ,
1. We are developing controller based on 28376S
2. The Software has two components , main loop and ISR based on XINT2
3. in some case we need to replace the source of interrupt (instead of XINT2 to be EPWM_INT)
…