Part Number: TMS320F28386D Other Parts Discussed in Thread: C2000WARE Dear sir,
1. I am trying to communicate with external device using SPI(which is configured in the CM4) if i keep CM4 in debug all signals like MOSI,CLOCK,CHIP SELECT are not coming…
Part Number: TMS320F28386D The specs of DSP are not exactly clear; it may be interpreted that the input clamping (protection) circuits on the digital inputs, for the positive input voltage, are actually activated at 4.6 V.
At that voltage each input is…
Part Number: TMS320F28386D Hi team,
Could you share specification difference between TMS320F28386D and TMS320F28386D-Q1?
I understand Q1 is for automotive grade, but cannot find difference except for ESD rating.
Is there any specification difference…
When data is blocked, the compiler can then apply optimizations to eliminate redundant loads of DP reg. For unblocked data, each DP load instruction must be kept. There may be more DP load instructions for unblocked than for blocked data.
Thanks greg
Part Number: TMS320F28386D
Case Number: CS0679559
Short Description: Overdriving the DSP with +5V SN65LBC170DB transceivers
Customer Response
Number: CS0679559 Contact: Marcin Brylak First name: Marcin Last name: Brylak Short description…
Part Number: TMS320F28386D Other Parts Discussed in Thread: C2000WARE Hello,
customer has tried to rebuild driverlib (from C2000Ware_2_01_00_00) in COFF ABI format but following error shows up (see attached).
"Error: Option --float_support=fpu64 is not…
Part Number: TMS320F28386D Hello,
What is the peripheral aimed by the PBISTCLK bit in the PCLKCR22 register ?
There is no such peripheral so not sure what functionality it acts on.
Thanks,
Best regards,
Clément
Part Number: TMS320F28386D
Hello,
In the SysCtl_isPLLValid function provided in the driverlib for the F2838x family, considering that the clock sources are the following:
CLK0: OSCLK source (in our case 20MHz oscillator or 25MHz if using demo board) …
Part Number: TMS320F28386D Hello,
While wandering around the PCLCR register, questions came to my mind.
At boot, all peripherals are assigned to the CPU1 and owernership can be given to the CPU2 by the CPU1. However, the registers from the system control…
Part Number: TMS320F28386D
Hello,
I want to program the boot of the CPU1 to boot from Flash without boot mode pin.
Do you confirm that the following code would work as per my understanding:
.sect "dcsm_z1otp_gpreg" ;0x0007 8008 .retain .long…
