Part Number: TMS320F28P550SJ Other Parts Discussed in Thread: C2000WARE Tool/software: Hi Team,
I am working on modifying the CAN Flash Programmer script in Visual Studio for the IXXAT CAN Analyzer. By default, the script is configured for the PCAN…
Part Number: TMS320F28P550SJ Other Parts Discussed in Thread: LAUNCHXL-F28P55X , SYSCONFIG Tool/software: SPIA is not working, I have a running code on the LaunchXL-F28P55X demo board with the F28P550SJ9PZ controller. And now I want to run my code at…
Part Number: TMS320F28P550SJ Other Parts Discussed in Thread: C2000WARE Tool/software: Hi TI team.
I am working on a project in which we used the F280037C and we now want to migrate this project to the TMS320F28P550SJ.
So I changed the MCU PN in…
Part Number: TMS320F28P550SJ Hello,
I've been playing around with the BISSC libraries for fp65x and I was able to integrate the same libraries in the fp55x. However, I have one missing feature that I would like implement. I would like to eliminate the…
Part Number: TMS320F28P550SJ Tool/software: Hi Champs,
I ask this for customer.
We recently encountered pulse events using EPWM with XBAR out5, and when using it as the synchronization source for EPWM5 and EPWM6, we found that occasionally synchronization…
Part Number: TMS320F28P550SJ Other Parts Discussed in Thread: SYSCONFIG I have been able to simulate my CLB1 logic and everything works fine. When I go to test it with the hardware, I don't get any ouput from the CLB1. I went ahead and made a test using…
Part Number: TMS320F28P550SJ Tool/software: Hi Champs,
In TRM, our requirements for clock synchronization of EPWM are as follows: we need to disable TBCLKSYNC before configuring EPWM, and then enable it after the configuration is complete.
In…
Part Number: TMS320F28P550SJ I am designing a SCR controller at 60Hz and I am using the ePWM to fire the SCRs. The gate output needs to have a single pulse of 120uSec followed by a 15kHz pulse train at 30% duty cycle. It appears that the ePWM chopper…
Part Number: TMS320F28P550SJ Other Parts Discussed in Thread: SYSCONFIG I initially was using the override to generate my gate pulse train on the epwm signals. There was not enough override signals for all 6 gate pulses, so it was suggested to use the…
Part Number: TMS320F28P550SJ Hi experts,
I found some descripiton mismatch in f28p55 TRM
In the picture, the CLB out connect to OUTPUT-XBAR and CLB OUTPUT X-BAR
However, in X-BAR chatper, there is no CLB OUTPUT X-BAR table. It seems that the OUTPUT…
