Part Number: TMS3705 Other Parts Discussed in Thread: UCC27424-Q1 , Tool/software: I just noticed that the TMS 3705 is a pretty old chip and I was just curious if it is still being kept up. If not is there another 134.2 khz HDX chip you would recommend…
Part Number: TMS3705 Tool/software: Do you have CE declaration of conformity for TMS3705 ( https://www.ti.com/product/TMS3705?dcmp=dsproject&hqs=#tech-docs ) ?
If not, do you have any info on whether this was tested to EN 300 330 V2.1.1?
Part Number: TMS3705 Tool/software: 400pcs product with TMS3705DQ1 failed at EOL test with ”Diagnostic bate value” test step.
Please help to understand this failure – test issue or setup issue.
And this TMS3705DQ1 change to TMS3705A1DRG4 would PASS…
Part Number: TMS3705 Tool/software: Hello,
TMS3705A1DRG4 this product is no longer manufactured. which of the following 2 products can I use instead of this product?
TMS3705GDRQ1 or TMS3705FDRQ1
Thank you
Part Number: TMS3705 Tool/software: Hi,
We have the following request from a customer. Can TI provide verification data such as spectrum variation over the entire temperature range?
We apologize for the difficult inquiry.
The circuit diagram on…
Part Number: TMS3705 Other Parts Discussed in Thread: UCC27424 , UCC27524A , Hello,
I use the TMS3705FDRQ1 together with UCC27524A, within the referencedesign described in manual SCBA021 "TMS3705 Range Extender Power Solution Using UCC27424"
I tried…
Part Number: TMS3705 Tool/software: Hi,
We are using the TMS3705EDRQ1, which is EOL now. The official successor type is TMS3705FDRQ1.
Could you tell me, is this part a drop-in replacement of TMS3705EDRQ1, and 100% firmware compatible?
Thanks you…
Part Number: TMS3705 Tool/software: Hi All,
We are considering the CSTCR4M00G55B-R0 as a clock source for the TMS3705FDRQ1.
We are trying to check whether the frequency deviation of the ‘CSTCR4M00G55B-R0’ is a problem for the ‘TMS3705FDRQ1’ for adoption…
Part Number: TMS3705 Tool/software: Hello,
I am currently designing an RFID reader for low-frequency applications. For 125 kHz, I am using the HTRC110 from NXP. However, I am encountering issues with the reading range. My target is a reading distance…