Part Number: TMS570LS0432 Other Parts Discussed in Thread: BQ76PL455EVM I am trying to program the TMS57004 Launchpad with the sample code provided by TI to work with the BQ76PL455EVM.
I set the RTI 100ms to update battery data, 100ms polling SCI notification…
Part Number: TMS570LS0432 HI,
I use TMS570 MCU CAN Bus functions.
I want do load the CAN ID and data.
how to write the code do to that?
I set the message box9 ID is 0x14EA01EF.
I set the int variable "u32temp" to read the ID,but it can work.…
Part Number: TMS570LS0432 Hello TI,
I am using TMS570LS0432, XDS200 debugger. INitially everything works. After new code chnage (code tested on TMS EVM but using XDS100v3 debugger by team member); i get following below errors but I use XDS200 instead…
Part Number: TMS570LS0432 Hi,
I would like to double check the recommended decoupling caps and values for this uC.
Vccio has 4 pins and Vcc has 7 pins. Is it recommended 1 cap per pin and a bulk capacitor?
We are using minimum functionality of the uC…
Part Number: TMS570LS0432 Other Parts Discussed in Thread: BQ76PL455EVM , Hi，
I am trying to program the TMS570432 Launchpad with the sample code provided by TI to work with the BQ76PL455EVM.
I see the "NOTE: Make sure that the resistor R8 is removed on…
Hi Kuanlei,
This example was developed by BMS team. You can get help more information from this forum:
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum
Yes. Apologies for not getting back you earlier. The issue stemmed from a prior designer not implementing schematic symbols correctly. Essentially, the previous designer copied/pasted resistor symbol and changed only the value of the resistor and not…
Part Number: TMS570LS0432 Hi,
Customer saw the zip in the previous thread and would like to request if the team can provide the 1738.SPI_EPROM_1224PGE.ZIP (Tried to looked into the file but once clicked it gives a message ""You do not have permission…
Part Number: TMS570LS0432 Other Parts Discussed in Thread: TMS320F28379D Hello to TI community
I have successfully implemented the CAN communication program and verified the data in PCAN view on my desktop for both the MCU TMS570LS004 and T…
The example is correct.
1. write 0 to PIO7 register to enable the pull (up or down)
2. write 1 to PIO8 register to select pull-up, write 0 to PIO8 to select pull-down
