Search tips
Showing 39 results View by: Thread Post Sort by

  • TMUX1104: leakage current in the TMUX 1104 above 1MHz

    TI Thinks Resolved
    Part Number: TMUX1104 Hello TI Member: We would like to use TMUX1104 to make a multiplexing gate circuit with operating frequency up to 50MHz. However, there is leakage current at 5MHz, which affects the use. We do not know the reason. Have you…
    • Answered

  • TMUX1104: CSOFF over temperature

    Resolved
    Part Number: TMUX1104 Hi, are there information how the (great at 25°) CSOFF capacitance changes over temperature? Thanks! Alen
    • Resolved
    • Answered

  • TMUX1104: Is the 10-DGS packaged device a pin to pin replacement for MAX4734EUB

    Resolved
    Part Number: TMUX1104 Hi, Could you please let me know if TMUX1104DGSR is a Pin to Pin replacement for MAX4734EUB. If not, what is the best replacement device you can recommend. Regards, Sandesh
    • Resolved
    • Answered

  • TMUX1104: Can TMUX1104 be used to switch clock signals ?

    Resolved
    Part Number: TMUX1104 Hello Team, I'm looking 1:4 mux solution supporting clock signals. The frequency of the clock is 25,CLK_L_max=0.45V,CLK_H_max=1.35V. Please let me know it. Thank you.
    • Resolved
    • Answered

  • TMUX1104: Source/Drain Input Structure

    Resolved
    Part Number: TMUX1104 Other Parts Discussed in Thread: TS3A5017 , OPA2197 Hi, since the absolute maximum ratings for "Source or drain voltage (Sx, D)" are in the range of -0.5V to VDD+0.5V according to the TMUX1104 datasheet, I suppose there are some…
    • Resolved
    • Answered

  • TMUX1104: The ground pin connection of analog mux

    Resolved
    Part Number: TMUX1104 Should the ground pin of analog mux be connected to digital ground or analog ground? I think it should be connected to DGND, because DGND is the reference for the control pins which are digital signal. Although analog signal is…
    • Resolved
    • Answered

  • TMUX1104: Thermal Data on DQA (USON) package

    Resolved
    Part Number: TMUX1104 Dear E2E, Good Day! Upon checking the datasheet of TMUX1104, there's no information regarding thermal data's for the USON package. https://www.ti.com/lit/ds/symlink/tmux1104.pdf Can you please provide us the Junction to ambient…
    • Resolved

  • RE: TMUX1104: higher signal input range robust version

    Ajayt, We currently do not have a device that will support ±25 V signals with a 3 to 5 V supply. We are continually trying to improve our offering to our customers so I will communicate your request to our product definers. Thank you, Adam

  • RE: TMUX1104: please recommend device to multiplex the output of an LDO to 4 separate loads.

    Hi Ravi, I do not think that TMUX1104 is suitable due to the absolute maximum source/drain continuous current rating of TMUX1104 is +/-30mA. I will look for a device with up to 200 mA I/O continuous current rating, as most signal muxes support lower…

  • TMUX1104: Can I use the DAC43608 + TMUX6104 to adjust four patterns of LED currents?

    TI Thinks Resolved
    Part Number: TMUX1104 Other Parts Discussed in Thread: TMUX6104 , DAC43608 e2e, I'm considering using the DAC43608 + TMUX6104 to adjust four patterns of LED currents as in the attachment. If you have an another recommended Analog SW, could you let…

Didn't find what you are looking for? Post a new question.