Part Number: TMUX1511 Other Parts Discussed in Thread: DS10BR150 , Hello,
we have an Jitter sensitive 25MHz LVDS Clock. The Clock-Source has different power-up timing and voltage source than the Clock-Buffer on our Board. We need to achieve a "Powered-off…
Part Number: TMUX1511 We have a query regarding Manufacturer Product Number : TMUX1511RSVR. For this part, can the unused source pins be sorted together and be connected to ground?
Can that be done for unused drain pins also?
Part Number: TMUX1511 Hi Experts,
we are having some problems with the PSPICE model (tmux1511.lib / scdm236.zip) of TMUX1511 - during the simulation, channel2 (D2/S2) does not work as expected (other three channels work).
An error appears in the simulation…
Part Number: TMUX1511 Other Parts Discussed in Thread: SN74CBTLV3126 Customer wants to understand the parameter comparison or difference between TMUX1511PWR & SN74CBTLV3126PWR, as they found the two devices are P2P to each other but the wave form of…
Part Number: TMUX1511 Other Parts Discussed in Thread: SN74CB3Q3125 Hi,
I would like to know what is the maximum propagation delay of TMUX1511? Similar devices such as SN74CB3Q3125 are specified in the datasheet as the maximum propagation delay 0.2ns@3…
Part Number: TMUX1511 Other Parts Discussed in Thread: TS5A22362 , TS12A4516 Hello,
We're currently testing the TMUX1511 with a PAL/NTSC video.
It's currently working but we are wondering about the analog sync tip which goes down to -300mV (so below…
Part Number: TMUX1511 Hello,
Is there more information on the ESD structure in the TMUX1511? Specifically, I'd like to know where current is discharged to if an ESD event occurs on pin S1 when the switch is open. Will the current discharge to ground…
Part Number: TMUX1511 Other Parts Discussed in Thread: TMUX1112 Is the TMUX1511 a good choice for very small analog signals? In the datasheet of the "predecessor" of the TMUX1511, the SN74CB3Q3125
it is stated that a charge pump is used. Will…
Part Number: TMUX1511
Hi ,
If I operate this IC at 5V , and at 0 Vdd what will be powered of protection voltage ?Will it be 3.6V as per datasheet or 5V?
Actually ,our applications is to sense 0-5 V so there is possibility of 5 V coming to signal pin…