Part Number: TMUX7209 Tool/software: Hello Team, good day to you.
This thread is based on one of the previous discussed here Link1 .
In Link1 , it is suggested that we can use TMUX7209 for CAN switching and since it is just a passive switch, I believe…
Part Number: TMUX7209 Other Parts Discussed in Thread: TMUX8109 Tool/software: Hello,
We are looking to use the TMUX7209 to multiplex some data communication signals which also includes CAN FD HIGH/LOW.
Due to the increased speed for CAN FD, it…
Part Number: TMUX7209 Tool/software: Hello Team,
In our design we have implemented TMUX7209PWR IC , Can you please review it and let us know if any modification are required :
Regards,
Tirthal Patel
Part Number: TMUX7209 Tool/software: Hi team ,
We are utilizing the TMUX7209RUMR part in our design ,I want to know that Will the IC work on the below mentioned scenario :
1.If my VDD : 5V , S1A,S2A,S3A will have 12,24,36V , Would I be able to…
Part Number: TMUX7209 Other Parts Discussed in Thread: TMUX7309F , TMUX7412F I would like to use the TMUX7209 as a cell measuring multiplexer in a 4S lithium battery BMS. Because of the construction of the pack and the fact that we need to assemble with…
Part Number: TMUX7209 Other Parts Discussed in Thread: TMUX6209
The A0 and A1 columns appear to be swapped in the datasheet in table 9-2, TMUX7209 9 Truth Table . Please confirm that this is an error in the datasheet.
The columns are suspect because…
Part Number: TMUX7209 Dear Team,
Do we have any suitable solution as below require?
Please check, and recommend have suitable analog switch 54V& 10mA current MAX (2:1 )as below, thanks!
Many Thanks,
Jimmy
Part Number: ADS127L21 Other Parts Discussed in Thread: TMUX7209 , OPA827 , OPA828 Tool/software: Hi Team
I am encountering a problem while multiplexing ADS127L21 using analog switches, as shown in the schematic below.
VIN_1, VIN_2, and VIN_3 are…
Part Number: MUX509 Other Parts Discussed in Thread: TMUX7209 Hi team,
My customer is using ADG409BRZ. I find our P2P device is MUX509 but the supply is 36V which is lower than ADI part. Do we have other suitable devices to replace it? Thanks.
Part Number: LMR64010 Other Parts Discussed in Thread: TMUX7209 , TPS7A49 , INA818 , , TPS61170 , TPS55340
Hi,
I'm working on a solution for a 24V to roughly 31V boost converter that only needs to supply 10mA. I don't care too much about voltage ripple…
