Part Number: TMUX7348F Tool/software: Sections 6.8 and 6.9 shows the same Ron of 390 ohm regardless if VDD is 12V or 36V? Figure 6-9 shows Vd has to be < 30V in order to fall on the 'flat' curve for VDD=32.4V. What is the equivalent for VDD=24V?
Part Number: TMUX7348F Hello Team, my customer is missing some specification in the datasheet:
-> specification of the minimum current into error-flags FF and SF for HIGH state (means IOH).
There is a specification in datasheet page 8 with 5mA @ 0…
Hi Michael,
Our 8:1 switches with both powered off protection and 1.8V logic support might be a bit more than what you're looking for. Our offerings that contain both these features in that configuration will be our TMUX7348F and TMUX7308F. Even for…
The following table helps select th e right multiplexer and switch with Mid Voltage 25V =< VSIGNAL =< 99V in different configurations:
Precision , Protection , Automotive , Extended Temperature
Configuration
16:1…
What are Overvoltage & Fault events?
An overvoltage or fault event is when a signal with a voltage greater than the maximum rating of the analog switch or multiplexer is fed into the device. These events can occur for many reasons such as EMI from a…
