Part Number: TMUXHS4412 Tool/software: Dear Texas,
At my company, we have a project to demultiplex an LVDS signal into 4 outputs. For that, we are using 2 TMUXHS4412 ICs in series to achieve a 1:4 demultiplexer configuration. The first IC receives the…
Part Number: TMUXHS4412 Dear Sir
Currently there is a USB4.0 two port to one port design, is it possible to realize the function of USB4 through TMUXHS4412? If it can be used on the USB4 high-speed line, which mux/demux should CC1/2, SBU1/2 use?
Best…
Part Number: TMUXHS4412 Tool/software: Hello, Does TMUXHS4412 have partial-power down protection (Ioff) for the Differential I/O pins? It is not mentioned in the datasheet, but the absolute maximum ratings imply that it may have partial-power down protection…
Part Number: TMUXHS4412 Tool/software: Hi Team,
There are no noise specifications in the datasheet that I could find. Are there any requirements for supply voltage noise performance of the Vcc pins?
Thanks,
Justin
Part Number: TMUXHS4412 Tool/software: on spec of TMUXHS4412, I found 3 AC couple cap placement option as Figure7-1
in my board, no connector, all devices are on the same board, and the endpoint is very close to TMUXHS4412.
To save the space and minus…
Part Number: TMUXHS4412 Other Parts Discussed in Thread: TS3DV642
Hi,
The ds says " The TMUXHS4412 is only recommended for differential signaling. If the two signals on differential lines are completely un-correlated, then internal circuits can create…
Part Number: TPS65988DK Other Parts Discussed in Thread: TMUXHS4412 , , TPS65988 , TUSB1044 Tool/software: Hi team,
My customer is considering specifications for USB PD in Alt mode with DP 2.1 (20Gbps).
They are currently thinking of using two ports…
Part Number: TMUXHS4412 Tool/software: Hi TI,
we'd like to select TMUXHS4412RUAR on MIPI verification.
I have two questions:
1) to get a better crosstalk, we'd like to make the gap bigger between used pads. For the unused ports P or N, how should…
Part Number: TMUXHS4412 Tool/software: Hello, We are looking for the 2:1 MUX/Demux switch with support of at least 4 or 8 channels. We have found the "TMUXHS4412" part but it will support only 20Gbps, but we are looking for 32Gbps (PCIe Gen5) support…
Part Number: TMUXHS4412 Other Parts Discussed in Thread: DXP Dear E2E teams,
i have selected TMUXHS4412 as switcher in my project.
The input of TMUXHS4412 is from type-C, such as TX1/RX1/TX2/RX2.
my question is if i can use DxP of TMUXHS4412 to…
