Part Number: TPA3005D2 Other Parts Discussed in Thread: TPA3118D2
Hi expert,
Can you help to confirm that whether TPA3005D2 can support two speakers (5W, 8Ohm) with the 12V power supply? the specifications are as follows:
BRS,
Rannie
Part Number: TPA3005D2 Tool/software: Hi,
I am currently working on a project that involves replacing the TPA3005D2PHP, a 6-W stereo Class-D audio amplifier, due to its obsolescence (Old Part). I am looking for a modern replacement that matches the…
Part Number: TPA3005D2 Other Parts Discussed in Thread: PCM2912 Hello, I am designing an amplifier using the TPA3005D2.
I received a few boards from the fab today and I noticed upon first power up that while an 8-ohm speaker is connected both the IC…
Other Parts Discussed in Thread: TPA3005D2 I have an audio amplifier that does not work while I took the identical schematic to the schematic of the module EVM PCB Layers TPA3005D2EVM .
I bought this module and to compare this one works.
Rinn & Linn…
Other Parts Discussed in Thread: TPA3005D2 hi,
TPA3005d2 is used in my application, I have some questions when I test it. (see the attachment test data)
My questions:
Because TPA3005d2 load impedance should be more than 6 ohm, piezoelectric…
Part Number: PCM2912A Other Parts Discussed in Thread: TPA3005D2 , , Hello,
I am using the PCM2912A in conjunction with a TPA3005D2 amplifier. The PCM2912A DAC specifies a 0.6 * Vcca (1.98Vpp) output with Rl > 10k load. However i am only getting 0.554Vpp…
Thanks, Steve.
It is very clear and understandable.
I tried with the codec setting based on your recommendation.
i) P=1, R=1, J.D=6.912, N=2, M=9, DOSR/AOSR=32, BCLK N=1
ii) P=1, R=1, J.D=6.144, N=2, M=8, DOSR/AOSR=32, BCLK N=4
I could see that…
