Part Number: TPA3110D2-Q1 Dear all,
You mention that 'The outputs are also fully protected against shorts to GND, VCC, and output-to-output.' at datasheet page.1.
Are there the mode that connected speaker current will increase and develop fever…
Part Number: TPA3110D2-Q1 Other Parts Discussed in Thread: TPA3110D2 Dear all,
Could you teach me how max current and power this device can output?
If you can not define the limit of current and power, can you define safe operation range? How current?…
Part Number: TPA3110D2-Q1 Other Parts Discussed in Thread: TPA3110D2 Hi~
Customer trying to evaluate TPA3110D2 and they want to measure power stage return current.
Based on block diagram, there are 4 PGND path from both L and R channels.
In pin description…
Part Number: DRV2510-Q1 Other Parts Discussed in Thread: DRV2605L-Q1 , TPA3110D2-Q1
Hi Team,
My customer now is designing a Automotive Infotainment system, need the LRA/Haptic * 4 in their design.
The LRA(or Haptic ?) datasheet as below.
And I also get…
Part Number: TPA3110D2-Q1 Dear all,
Could you teach me about title?
At 16V/14V/11V/9V, how does the temperature characteristics of GVDD change?
You mentioned that GVDD will change 6.4~7.4V at Vcc=12V/24V at data sheet.
In other words, will not the temperature…
Dear all,
How will this device do when thermal shutdown in SDB=Low.
I think that there will be nothing changed because thermal shutdown function just make output FET off.
Is my idea correct?
Are there other function / indication at thermal shutdown…
Other Parts Discussed in Thread: TPA3110D2-Q1 Hi champs,
My customer asked following questions regarding to TPA3110D2-Q1.
Can you confirm below?
(1) EMI suppression
Should Beads filter (or inductor) and capacitor be placed closed to output port of the…
Dear all,
Could you teach me the individual difference and tolerance over temperature (-40~85C) of Vp?
**Please consider PLIMIT has no tolerance
You mentioned 'Vp=4*PLIMIT' at data sheet.
However, is this '4 times' always the same value between…
Yamamoto-san,
I have not seen the internal design for this feature, so I am speculating as to how the LDO voltage is changed. If the reference is changed, then changing a resistor somewhere would probably be the easiest method.
When designing with the…
Other Parts Discussed in Thread: TPA3110D2-Q1 Dear all,
My customer concern whether the back electromotive force from speaker will break TPA3110D2-Q1.
Could you teach me what point should I measure back electromotive force to judge this device will be…