Part Number: TPA3121D2 Hi, Amp team
My customer has reported technical issue on TPA3121D2.
Description: TPA3121D2 is Mute, after power on or Reset the device.
The AMP output turns OFF after approximately 5–6 seconds. When power is cycled or the…
Part Number: TPA3121D2 Hi TI team,
Regarding this device there was a PCN#20231207005.0 release on December 08, 2023.
May I know what is the meaning of "ECAT information"? Please eleaboarte the meaning of "ECAT" if it is an abbreviation.
Thank you…
Part Number: TPA3123D2
First off, I need to apologize up front for a somewhat obscure question since my hands are sort of tied. But as others have experienced, I've seen the issue (TPA3123 hot at power up) pop up a few times in the forums.
The problem…
Part Number: TPA3121D2 I am using TPA3121D2 in single ended configuration with 8 Ohm load.
I am facing issue if interference of oscillator switching frequency with output signal.
Query 1: Without giving any input at Lin pin, Output at Lout is always…
Part Number: TPA3121D2 Hi Shawn,
While testing audio power amplifier TPA3121D2 , i find gain is 4db than what is set through gain resistors.
As per datasheet , tolerance is of +-2db only. I give 24V input , i find clipping at output more than 7V…
Part Number: TPA3121D2 Hi,
Please help me to understand below two queries.
I would like to understand the reason behind the recommendation of bulk capacitor 470uh for both VCC pins of tpa3121d2 audio amplifier, shall we use lower capacitance instead…
Part Number: TPA3121D2 Hi,
Can anyone suggest a suitable low noise switching regulator/LDO for TPA3121D2.
VCC > 24V from 28V.
Power dissipation is around 1W.
Thanks,
Divya
Part Number: TPA3121D2 Hi,
How does TPA3121D2PWP react to a 20 usec rail transient on its power supply rails. In our current design, this device is powered with 24.5V and used more than 470uf bulk capacitor.
Basically I would like to know whether…
Other Parts Discussed in Thread: TPA3121D2 , LM317 , TPS5410
Hi,
Can anyone suggest a suitable low noise switching regulator/LDO for TPA3121D2 .
VCC > 24V from 28V.
Power dissipation is around 1W.
Thanks,
Divy
