Part Number: TPA3124D2 Tool/software: Hi team,
In D/S 10uF capacitor is recommended for AVCC terminal.
However, 220uF cap is used in TPS3124D2EVM (C11)
What is the reason?
Best regards, Goto
Part Number: TPA3124D2 Dear Sirs;
I could not find the boot strap pin voltage rating in the datasheet of TPA3124D2. What is the absolute maximum rated voltage of the BSL(BSR) pin?
Thank you in advance.
Best Regards,
M. Ohta
Other Parts Discussed in Thread: TPA3124D2 Hello to whom it may concern,
The TPA3124D2 does not describe threshold value of short circuit protection.
What does detect when operating the short-circuit protection circuit?
(voltage or current?…
Hi, Hirata-san,
We do not specify the short circuit trip level. It is set above the current needed to get the rated output power.
For thermal resistance, that info is contained in the "DISSIPATION RATINGS" section of the data sheet. 1/derating factor…
Hi, Michael,
Welcome to E2E, Thanks for your interest in our products!.
The logic input levels for the TPA3124D2 are specified in the Recommended Operating Conditions table of the datasheet. 2V is the high level threshold, while 0.8V is the low level…
Other Parts Discussed in Thread: TPA3124D2 , TPA3123D2EVM Can anyone help me with this. I am using a TPA3124D2 for audio power amp and I am using all the recommended values mentioned in the datasheet and the evaluation board (tpa3124d2evm) but when my…
Other Parts Discussed in Thread: TPA3124D2 Q: Does TPA3124D2 support current protection?
I tried to find performance data of the TPA3124D2. But, the datasheet of TPA3124D2 doesn't contain current protection.
So, Here's the question. The TPA3124D2…
Derek, How would this configuration cause pop issues, and couldn't I further filter the negative outputs to get rid of any noise? With these issues, would you then recommend to use the TPA3124D2 with its native SE output instead at 3x the cost? Thanks…
Hi, Ravindra
Analog input, Open loop Class D, you can take TPA3004D2/TPA3002D2 as your reference.
Analog input, Single ended output, you can take TPA3124D2 as your reference.
