Part Number: TPA3130D2 Hello:
DAP0032C, there are several reference images for the packaging library, and there are some differences in the size annotations. Could you please tell me which one should be used as the standard? Thank you!!!
Part Number: TPA3130D2 Other Parts Discussed in Thread: TPA3116D2 Tool/software: Hi,
Is there a reason behind the TPA3130D2 using such a large resistor (0805, 1/4W for R20-R23) in the EVK SLOU341A ? Or can smaller resistors be subbed in for this design…
Part Number: TPA3130D2 Other Parts Discussed in Thread: TPS61088
Hello everyone, For one of my University project, I need to build an audio amplifier to drive one speaker.
So far, I have chosen the TPA3130 because it seems to be a good…
Part Number: TPA3130D2 Hi Sir,
As title, I would ike to know if TPA3130D2 support 2x15W (stereo)@4ohm, 12V? In this condition, the current would be up to 4A (IC OCP is 4.5A ) any themal concern?
Thanks,
Jacky
Part Number: TPA3130D2 Other Parts Discussed in Thread: PCM5121 , TAS5825M , TAS5805M Hi,
We are using TPA3130D2DAP in our design with 15V supply. We are using MCU 3.3V logic and we would like to control TPA3130 via 3.3V MCU IOs. Please answer the following…
Part Number: TPA3130D2 Other Parts Discussed in Thread: TPA3116D2EVM hi all，
IC: tpa3130d2 PVCC and AVCC = 15V
BD mode, there is no input audio, and the oscilloscope tests any output (single end to ground test) DC = 7.5V, which I think is correct…
Part Number: TPA3130D2 On page 26 of the TPA3130D2 datasheet, the diagram of a typical application is given with two amplifiers. To synchronize the two amplifiers the sync pin is used through an RC circuit.
We have implemented this scheme (dual amplifier…
Part Number: TPA3130D2 Hello Sir:
Can we use TPA3130D2 to replace AP2622??
Do you have better solutions?
The first element is lead time should be short and secondary is price.
Please help to provide recommendations for us.
Thanks a lot.
Part Number: TPA3130D2 Now a project is using a Class D power amplifier chip, model TPA3130D2.The design adopts Mono Mode configuration, which can provide 30W.Use 24V@2A adapter for power supply.
Problem: There is instantaneous power consumption greater…
