Part Number: TPA3136D2 Other Parts Discussed in Thread: TPA3110D2 , Hi,
I need to design a board with 8 audio amplifiers (16ch). I selected TPA3110D2 with standard ferrite bead filter but I did not pass EMI.
I am going to use TPA3136D2 instead of TPA3110D2…
Part Number: TPA3136D2 Other Parts Discussed in Thread: TPA3111D1
Hi Team,
One of my customer is using TPA3136D2 class D power amplifier for one of my testing. It’s a dual channel power amp & have a common shutdown pin.
They wanted an IC which…
Part Number: TPA3136D2 Hi,
is there a way to disable the fault pin function on TPA3136D2?
see that the minimum differential input voltage required to trigger the DC detec is 130mV.
That means, if i have a 1kHz sine wave at 200mV Amplitude it will trigger…
Part Number: TPA3136D2TPA3136D2 app note 11.1 states the following:
".... Also, a small decoupling resistor between AVCC and PVCC can be used to keep high frequency class-D noise from entering the linear input amplifiers."
My question is how…
Part Number: TPA3136D2 Hello,
Is it possible to get the reference design for this part as a ECAD schematic file? Specifially for Altium Designer? We've been using this design in one of our products and it has caused some issues with popping noise. I would…
IMX_AUDIO_INTERFACE.pdf Shawn,
I updates the schematic based on your feedback. (file attached). My question is, there does not seem
an easy way to connect the TPA3136D2 EVM output in the PBTL output configuration (Fig 19 from the
TPA3136D2 datasheet).…
Part Number: TPA3136D2 Today the audio demo using the Colibri 3.2 eval board and the TPA3136D2EVM worked
with the single 4 Ohm 3W loudspeaker.
The max analog headphone volume for the SGTL5000 audio codec is 12dB and the
TPA3136D2 has a fixed analog…
Part Number: TPA3136D2
The input to the TPA3136D2 is coming from the analog headphone output of the SGTL5000 audio codec.
I have used a combination of the TPA3136D2EVM schematic and Fig 19 from the TPA3136D2 datasheet
to put this schematic together.…
