Part Number: TPA3245 Other Parts Discussed in Thread: TPA3255 Hi
Is it OK if I use the TPA3245 at -20 ° C to -10 ° C?
I think that there is no problem as the junction temperature of IC rises.
If there is a problem, is there a recommended IC?(Performance…
Part Number: TPA3245EVM Other Parts Discussed in Thread: TPA3245 Hello Team
The SNR of TPA3245 is 112dB. How can get this data use TPA3245EVM? Does single end input can get it? if yes, how do set up it? the input amplitude?
Part Number: TPA3245 Other Parts Discussed in Thread: TAS5086 Hi,
The clipping behavior described in '9.4.2 Signal Clipping and Pulse Injector' occurs at 83 % output level of PVDD×2 in our customer's TPA3245/PFFB board.
TPA3245/PFFB…
Part Number: TPA3245 Other Parts Discussed in Thread: TPA3255 , TPA3251 , TPA3244 , TPA3250 For BOM reasons, we would like to consider the TPA3245 for a powered speaker application. I've noticed the part is not really spec'd for 8Ω, assumedly due…
Part Number: PCM1690 Other Parts Discussed in Thread: TPA3245 Hello all, i'm designing a PCB with the PCM1690 directly driving a TPA3245. Due to size and cost, i'm willing to sacrifice some 'dbs stopband attenuation by only using a passive reconstruction…
Part Number: TPA3245 Hi,
A customer has questions about TPA3245 power supply. Q1: In standby mode of their application, GVDD and VDD are not supplied but they will continue supplying PVDD. Is there any problem? Q2: If /RESET pin is low and supplying only…
Part Number: TPA3244 Other Parts Discussed in Thread: TPA3245 Hi. I'm using the TPA3244 in a design and I saw that the gain is given as 20dB in the datasheet. I measured it (differentially) and I can't get more than 18dB, which coincidentally is the same…
Other Parts Discussed in Thread: TPA3245 , TPA3255 , TPA3251 Hi,
A customer is interested in Post-Filter Feedback. He asks us whether the PFFB is applicable to TPA3245. If it is applicable, please teach us the recommended value of each capacitors and resistors…
Part Number: TPA3245
In looking through the datasheets of TI's highest-performing class D amps (the TPA32xx series), I don't see any mention of the modulation scheme used.
I'm hoping one of the alternative schemes like BD, 1SPW, or ternary is…