Part Number: TPD3S014 Dear *,
we have few questions regarding the TPD3S014, we want to use it for UAB 2.0 HS Host A type connector.
1) the TPD3S014 has integrated current limit switch with reverse current blocking
if I'm reading the datasheet…
Part Number: TPD3S014-Q1 Dear team,
I have a question for the output capacitor value. In the below section, our datasheet explains why we need 150uF capacitor, but I still can't understand it.
Firstly, based on the description, I think 'a short…
Part Number: TPD3S014 The TPD3S014 specs note a max input voltage (PIN 3) of 6V.
Question: is this limit only valid when chip is enabled?
or better: when chip not enabled, can chip handle higher voltages (say 8.4V)?
Part Number: TPD3S014 Other Parts Discussed in Thread: TPD12S520 Hi
Customer is considering ESD protection devices for HDMI as below, Could you please let me know your recommended devices?
Source side TPD4E02B04DQAR TMDS
TPD4E05U06DQAR DDC …
Part Number: TPD3S014 Other Parts Discussed in Thread: TPS25840-Q1 , TPS254900-Q1 Hello USB interface. Split from original thread: https://e2e.ti.com/support/power-management/f/196/t/883196
Please provide some suggestions USB2.0 protection and EMI.…
Part Number: TPD3S014-Q1 Hi team,
For EN = Low of TPD3S-14-Q1, if the OUT pin is connected to other 5V source, the output discharge function will sink the current from the external 5V, and the power will be dissipated as below.
-. I = 5V / 300ohm…
Part Number: TPD3S014 Hello team,
According to the datasheet, this device is UL 2367 recognized part and CB File No.E169910", so could you provide the UL recognized materials or test report to us? My customer is gathering such a safety related information…
Part Number: TPD3S014 Hi Team TI,
I am using this part in our project for USB ESD protection and USB HOST power. I want know that how much current it will sink in no load condition.What we have observed that it is taking almost 20mA in no load condition…
Part Number: TPD3S014 I might have a case where 5 volts will be applied from a host PC to the type A connector connected to the TPD3S014 out pin. Would this chip be able to withstand backward flowing DC is it recommended to place a low Vf diode so current…
