Part Number: TPS1663 Hello, My customer would like to use TPS16630RGET. Their requirements are as follows. Vin=24V Iout(max)=5A In this case how much rated voltage CAP should be used for CdVdT? Best regards, K.Hirano
Part Number: TPS1663 Dear Team,
Could you let me know the IF forward current rating and VF forward voltage rating of the body-diode of the internal FET of TPS16630?
I look forward to your reply. Thank you.
Best Regards,
Koshi Ninomiya
Part Number: TPS1663 About TPS1663, does it could satisfy high slew rate power signal transmit? such as the signal change from 8V to 40V(Around) in 600ns. It seams slew rate is 53V/us.The output will have the problem as below.
Yellow is input. Blue…
Part Number: TPS1663 Hi TI Teams,
We want to add OVP in front of DC/DC and now chosen the TPS16630, but there are some questions about SHDN pin, as follows:
Since the tps16630 was placed at the front of the power supply, and it will automatically…
Part Number: TPS1663 Hi, Team.
could you answer below question i've been asked by Customer?
1. what kind of behavior will TPS1663 will do in case of current limit?
-> shutdown ? or will IC try to clamp the amount of current customer set ?
…
Part Number: TPS1663 Other Parts Discussed in Thread: LM5069 , CSD19532Q5B Hi team,
I'm design TPS16630 as hot swap IC in the 56Vin/5A(max) system. The schematic show below.
The issue I have right now is the TPS16630 will damaged during the hot…
Part Number: TPS1663 Other Parts Discussed in Thread: LM5069 , Hi Team,
We had a query about the inrush protection.
Below is the configuration of the circuit and it's results.
Cdvdt = 0.068uF
Rlim = 3.3Kohms
Test Condition 1:
2 x 470uF Capacitors…
Part Number: TPS1663 Can you tie together the current monitor pins of two TPS1663 (Imon) devices together and expect a sum of the two current sources? My load is a simple resistor to ground buffered with a high impedance instrumentation amplifier.
Part Number: TPS1663 Hi,
According to the datasheet for the TPS1663, the eFuse turns on when the nSHDN signal is HIGH. However, in my design, the TPS1663 eFuse is in between the power supply and the MCU (which is powered by the power supply), and…
