Part Number: TPS1HA08-Q1 Tool/software: I am planning to use the TPS1HA08DQPWPRQ1 , which supports a current limit of up to 80A , but my requirement is 30A . The Rsns value in the reference design is taken approximately. How should I correctly select…
Part Number: TPS1HA08-Q1 Tool/software: I'm currently working on a single-channel power switching board.
It's a small form factor (About the size of a quarter) with limited thermal mass.
I'm trying to drive two linear worm gear motors - but am finding…
Part Number: TPS1HA08-Q1 Other Parts Discussed in Thread: TPS27SA08-Q1 Tool/software: Hello E2E Experts,
Good day.
We are working on a board that utilizes the TPS1HA08-Q1 as a high side driver for passing 24V to our low voltage systems. We are having…
Part Number: TPS1HA08-Q1 Hello, we want to use TPS1HA08C as Power Switch to supply a number of ECUs. We do not know, which electronics might be connected to this Power Switch in the future, so we need to define limits for Capacitance / Current Draw. …
Part Number: TPS1HA08-Q1 Hi team,
When EN=L and DIA_EN=H, will the normal current sense function work even if the FET in the IPD is broken by short then the VBB-VOUT is short-circuited?
Regards,
Youhei MIYAOKA
Part Number: TPS1HA08-Q1 Hi Experts,
For TPS1HA08-Q1, Is ICL (current limit) fixed or can we change based on load demands? If in case Current limit is fixed? Please suggest an help suggest an alternative.
Thank you and best regards,
Gerald
Part Number: TPS1HA08-Q1 Hi Expert,
I see that TPS1HA08-Q1 has energy limit. So I just link it to I2T function in eFuse application. I suppose they are not the same but I don't know what's different. May you help clarify? Thanks.
BR,
Elec Cheng
Part Number: TPS1HA08-Q1 Hi team,
Could you advise all the affected parameters and its impact if VBB is above 3V but less than 8V?
It is explained in the datasheet as below. It seems R ON is small increased. Is there any other parameters or functions…
Part Number: TPS1HA08-Q1 Other Parts Discussed in Thread: TPS3305 My two questions are about the differences between version A and version E of the device
We have an existing circuit whose design includes version A — so, the full device number is TPS1HA08A…
Part Number: TPS1HA08-Q1 Hi team,
Could you advise the difference between I SB and I OUT(standby) current in the EE table of the datasheet?
I would like to know the total input current drawn from battery (12V lead acid battery connected to VBB) in…
