Part Number: TPS1HTC30EVM Other Parts Discussed in Thread: TPS1HTC30-Q1 , Tool/software: Dear Sir/Madam,
I'm evaluating the TPS1HTC30-Q1 part on the TPS1HTC30EVM board, and I'm seeing very strange behavior. J3 is the 3-pin header where the EN pin can…
Part Number: TPS1HTC30EVM We purchased and are testing TPS1HTC30EVM with the following modifications:
At 4.4A using a resistive load, the chip is operating as expected.
From 4.5A up to 4.9A using a resistive load, the chip indicates a fault. The…
Part Number: TPS1HTC30EVM Other Parts Discussed in Thread: TPS1HTC30-Q1 The schematic given in the TPS1HTC30-Q1 EVM user guide does NOT match the PCBA of the EVM.
How do I get the schematic that matches the TPS1HTC30-Q1 EVM.
I am attaching the user…
Part Number: TPS1HTC100-Q1 Other Parts Discussed in Thread: TPS1HTC30EVM , TPS1HB50-Q1 Tool/software: Hello, Does TI have any spice models for TPS1HTC100-Q1? Best regards, K.Hirano
Part Number: TPS1HTC30-Q1 Other Parts Discussed in Thread: TPS1HTC30EVM Hi,
I have two questions about TPS1HTC30 when RILIM = GND:
1. What is the minimum current when RILIM = GND ?
In the data sheet only typical value shows
2. Which maximum…
Hello,
We do not have a PSpice model for this part. To test device functionality, I would recommend using the evaluation module which can be ordered here: https://www.ti.com/tool/TPS1HTC30EVM?keyMatch=TPS1HTC30-Q1%20EVM
Best Regards,
Elizabeth
Hi Sebastian,
We do not have any transient thermal information or simulation model for the TPS1HTC30, however based on our thermal calculations and testing, we specify the continuous load current under the following conditions to be able to support…
