Part Number: TPS2111A Other Parts Discussed in Thread: TPS2112A , TPS2110A , TPS2116 Hello,
I looking for an equivalent for TPS2111A ( 2 Input / 1 Output ) in SOIC-8 package and the same pinout.
Best Regards,
Rob
Part Number: TPS2111A Tool/software: Hi TI team,
I’m working on a design that uses the TPS2111A , and I’m performing detailed simulations of my power circuit. I couldn’t find an official SPICE or PSpice model for this device on the product page.
Would…
Part Number: TPS2111A Other Parts Discussed in Thread: TPS2111 , TPS2116 Hello
Please provide us the information about the deference's between part number TPS2111PW and TPS2111 A PW
Waiting for your comment
Thanks
Arik
Part Number: TPS2111A Other Parts Discussed in Thread: TPS2113A , TPS63000 The power Mux is provided with voltage of 3.3V to IN1 from primary supply source and another voltage of 3.3V from secondary supply source. The output of the mux is given to various…
Hi Andrea,
Internally the D1 pin will always have a 1uA pull coming from either IN1 or IN2. This pull up-along with the capacitor could be causing the erratic behavior observed in your circuit when connecting D1 directly to IN1, but it is odd behavior…
Part Number: TPS2111A Hi,
We are using the TPS2111A to switch power between a Lipo battery and a USB power source(regulated down to 3.8V) to power a device in one of our designs. Recently one of our customers has reported that the device is not wroking…
Hi Robb,
We're a bit tight on resources due to the holiday season approaching. I will take a look early next week and try to respond by Tuesday (shooting for Monday).
I'll take a look mostly from the TPS2111A's point of view. If it looks good…
Other Parts Discussed in Thread: TPS2111A For TPS2111A , i f D1 is not driven by a logic gate and is pulled down and connected to a power supply, would that cause a problem? The datasheet doesn’t specify whether they’re Schmitt trigger inputs.
reg…
Answer:
Yes, an internal blocking diode with the Anode connected to the internal VDD rail and the Cathode connected to the control logic input prevents these inputs from biasing the device.
