Part Number: TPS2113A using TPS2113A to power share from 2 lipoly batteries so that they drain evenly. effectivelt ORing the supplies.
IN1 = 4.07V
IN2 = 4.15V
EN and VSNS are both tied to ground. Ilim=400R
Despite IN1 < IN2 it is selected, both…
Part Number: TPS2113A
Tool/software:
Hi.
The TPS2113ADRB datasheet says ABSOLUTE MAXIMUM RATING Io=MAX 2.5A, RECOMMENDED OPERATING CONDITION Io=MAX 2.0A.
Can I set it to 2.5A with R_ILIM=200ohm and use it?
Thanks~
Part Number: TPS2113A Other Parts Discussed in Thread: BQ25170J , TPS2112A Tool/software: Hi Team,
I've built a TPS2113A circuit for power switching between USB 5V and 3.7V Battery.
The output is connected to a Boost Converter for 5.2V output…
Part Number: TPS2113A Other Parts Discussed in Thread: TPS2116 , TPS2117 Tool/software: I have a modular system that can consist of a single unit, or be expanded with several units connected together. Each unit can either receive power from a 5Vusb on…
Part Number: TPS2113A
Hi~
IN1=MAIN POWER(OFF STATE, 0V), IN2=BATT connected.
As shown in the picture, EN=LOW and VSNS=52ms high were applied.
VOUT does not become IN1(0V) even during VSNS=HIGH(52ms) and IN2(BATT) is output.
It is confirmed that…
Part Number: TPS2113A Hi~
In the 2113A 7-page truth table, what is the output if enable is always low(0) and Vsns is floating (not connected)?
Best Regards.
Part Number: TPS2113A Hi,
Good Day.
The customer is looking for Power Path Controller/Switcher that can switch between three sources.
He saw a few eFuses, those in the Oring application would be an alternative but mainly it's around 300W switching…
Part Number: TPS2113A Other Parts Discussed in Thread: TPS2116 , TPS2121 , TPS2124 , Good morning
Please, could you indicate me the followiing thermal resistances for TPS2113APWR :
- Theta Junction/ Ambient (ºC/W)
- Theta Junction / Case (ºC/W)…
Part Number: TPS2113A Other Parts Discussed in Thread: TPS2121 Dear Sir or Madam,
my question regards to set two TPS2113A in parallel to get a higher current delivery. Unfortunately I cannot find an alternative switch with the same conditions but with…
Part Number: TPS2113A Other Parts Discussed in Thread: TPS2115A Hi,
I've couple of configuration questions involving the parts 2113A and 2115A. In my platform IN1 is 5V and IN2 is battery power 4.37V. IN1 is always higher.
1. If I use TPS2113A and…
