Answered

• TPS2113A: Rise time on output

  

  KevinMD

  Resolved

  Part Number: TPS2113A Other Parts Discussed in Thread: TPS2116 If I have a TPS2113A device with these initial conditions: #EN=0V, VIN1=0V, and VIN2=0V, and then I switch on a 3V input to VIN1... what is the rise time on the output as it goes from 0 to…

  • Resolved

  • over 5 years ago
  • Power management
  • Power management forum
Answered

• TPS2113A: need additional details for derating

  

  user5018898

  Resolved

  Part Number: TPS2113A Hi, I am working on some derating activity for this device, but i am not able to find all the information i need from the datasheet. I see there is the rdsOIN curve in figure 8 of the datasheet, but do you have one for the…

  • Resolved

  • over 5 years ago
  • Power management
  • Power management forum
Answered

• TPS2113A: Output voltage drops when switching from IN2 to IN1

  

  Gus Martinez

  Resolved

  Part Number: TPS2113A Other Parts Discussed in Thread: TPS2116 , TPS2121 I have the following schematic in my design. XFMR_OUT (IN2) is always on. HSEC_5V0 (IN1) is turned on and off. When I turn HSEC_5V0 (IN1) on, sometimes the output of the switch…

  • Resolved

  • over 5 years ago
  • Power management
  • Power management forum

• TPS2113A: TPS2113A - Material Declaration

  

  Marc Fournier7

  TI Thinks Resolved

  Part Number: TPS2113A Support Path: /Product/Production, ordering, and quality/ Hi, We are using the TI part TPS2113ADRBT but we couldn’t get the material declaration on the website (it’s unavailable for this part). I have also tried the pull down…

  • over 8 years ago
  • Power management
  • Power management forum

• TPS2113A: Prioritizing External 5V DC in a redundant 5V from DC and USB

  

  Ramon Vann Cleff Raro

  TI Thinks Resolved

  Part Number: TPS2113A Other Parts Discussed in Thread: TPS2113 Hi, We are looking to use TPS2113 to Mux two 5V supplies. One from a 5V regulator 2A and one from 5VUSB. I tried to design the circuit such that, IN1 (5V external) is prioritized and switches…

  • over 5 years ago
  • Power management
  • Power management forum

• TPS2113A: Failure modes analysis

  

  Nigel Hester

  TI Thinks Resolved

  Part Number: TPS2113A As part of our design we need to consider and assess all possible failure modes. Since the TPS2113A device is connected to both input power rails and to ground. Is it possible that the TPS2113A could fail in such a way to crowbar…

  • over 6 years ago
  • Power management
  • Power management forum

• TPS2113A: tps2113a input 1 will give power to input 2, Is it right phenomenon?

  

  Frank Xiao

  Part Number: TPS2113A Hi team, My customer is using the TPS2113A now, when remove VBAT_DC_5V, 5V_Cap will sink the current to IN1, we want to check whether the phenomenon is right or not. Thanks

  • over 8 years ago
  • Power management
  • Power management forum

• TPS2113A: Failure Modes(Overvoltage on IN1 and IN2)

  

  Lindsey Fike

  TI Thinks Resolved

  Part Number: TPS2113A Hello, Can we share any data on the failure mode of overvoltage on IN1 and IN2 of the TPS2113ADRBR power switch? Thanks!

  • over 6 years ago
  • Power management
  • Power management forum
Answered

• TPS2113A: current limit accuracy with 2A

  

  Matteo Silotto

  Resolved

  Part Number: TPS2113A Hi, I am using the current limit function of TPS2113A centered to approximately to 2A (Rlim=253Ω). I've found on datasheet the current limit accuracy for Rlim to 700Ω and 400Ω, but not an indication about how accuracy change with…

  • Resolved

  • over 7 years ago
  • Power management
  • Power management forum
Answered

• RE: TPS2113A: TPS2113APW vs. TPS2113PW

  

  Alpha H

  Resolved

  Hey Brian, Thanks for reaching out on E2E! The TPS2113A version is available in different packages and has a faster switchover time (tPLH2). This reduces the amount that VOUT will dip when switching between inputs. Thanks, Arthur Huang

  • over 7 years ago
  • Power management
  • Power management forum

Didn't find what you are looking for? Post a new question.