Part Number: TPS2115A Other Parts Discussed in Thread: TPS2115 , TPS2116
Hello Expert,
May i know the main different between TPS2115PW VS TPS2115APW ? both are TSSOP-8 (PW) package.
we are selecting between them, but i can tell the different from…
Part Number: TPS2115A Hello,
I would like to confirm that what "deglitch of IN2-IN1 comparator" specification stands for. Can I understand this specification stands for voltage on OUT switching over from IN2 to IN1 presented in Figure 4. I think Figure…
Part Number: TPS2115A Hi
USB POWER SWITCH ( adjustable current + OVP ) Requirements: Regardless of whether it is turned on or off, it must have a reverse cut-off function to prevent reverse backflow USB PORT can be used alone and only needs 1.XA current…
Part Number: TPS2115A Other Parts Discussed in Thread: TPS2116 , TPS2113A Hello,
We have a customer asking for the same user-specified value mentioned on Figure 14 of the datasheet. Apparently this is a typo error as mentioned on some of the old posts…
Part Number: TPS2115A Hello,
I would like to ask you about the TPS2115A device. The attached waveform is a monitor of the current flowing through this device. Average current is 1.38A, but momentary 2.06A. (question) The recommended operating conditions…
Hi Stephen,
Do you have access to an TPS2115A EVM? I would recommend testing your system out on an EVM first.
The TPS2115A is a PowerMUX and so it will be able to select one rail and pass to the output followed by the other in a break-before-make…
Part Number: TPS2115A Other Parts Discussed in Thread: TPS2115
Hi,
We are using TPS2115ADRBR in our system to manage two power supplies (VBUS and SYSTEM_PWR). We have followed the Auto-Selecting for a Dual Power Supply Application given on the datasheet…
Part Number: TPS2115A
Hi,
do you see any concern operating this device with one of the input pins at 0V? It appears the recommended operating conditions suggest both IN1 and IN2 need at least 1.5V applied. We'd like to run with one of the inputs always…
Part Number: TPS2115A Hi,
are there any issues using an external 10K pullup (to a LiIon battery) on the D1 logic input of the TPS2115A? the LiIon battery will be one of the two power switch inputs (IN1) to this mux.
Thanks,
Sal
Part Number: TPS2115A Other Parts Discussed in Thread: TPS2120 , TPS2121 Hello Power Switch team. Split from original thread: https://e2e.ti.com/support/power-management/f/196/t/883196
Please provide some suggestions power source selection.
At the…
