Part Number: TPS22810EVM Tool/software: Hi Team,
I expect that I can see the 12V output with PWM 50% at 220Hz. But the output waveform is weird. May you let me know why we can't get the output normally and how can we get the desired 50% duty Vout…
Part Number: TPS22810 Tool/software: Can anyone tell me if there are mounting holes in the TPS22810EVM board? The 3D model doesn't show any - it looks like it only has pads on the bottom. I'm wondering if there are easy options for mounting in a chassis…
Part Number: TPS22810 Hi,
The datasheet of the TPS22810 does not explicitly mention that the thermal pad of the WSON package can be shorted to the circuit ground (e.g. shorted to pin 4). In the schematic of the TPS22810EVM module I see that this is…
Hi Steve,
We do not have characterization data with regard to the relationship between CT and delay time specified.
We do have evaluation modules available where the customer can observe experimentally the performance of the device.
These evaluation…
Hi Marvin,
Please direct the customer to the "TPS22810 and TPS22810-Q1 Unencrypted PSpice Transient Model Package (Rev. A)" below the model you have highlighted in green. Using this model, we do not see this behavior.
This will be show the best behavior…
Hello Huang-san
Thank you for support.
I got EVM and confirmed UVLO pin current under customer's condition. (Please see attached file)
The result was not changed from 0.1 uA at 0 to 20 V.
Based on this result, I'm going to ask customer to recheck…
