Part Number: TPS22916 Tool/software: Hi,
In my customer's configuration of their circuit with TPS22916, the customer connects ON pin with IN pin. It means VON = VIN.
Does this configuration works well?
Best Regards, Taki
Part Number: TPS22916 Tool/software: Is it possible to use 2 x TPS22916 in parallel to switch 5.2V with 3.5A max current? If yes, is there anything I should be extra careful here?
Thanks
Part Number: TPS22916 Tool/software: Hi support team, I have a question about reverse current blocking in the TPS22916CNYFPR.
The IRCB threshold is -500mA, but does that mean that reverse currents of less than 500mA will occur?
Also, I think the…
Part Number: TPS22916 Tool/software: Hi
The input voltage is 3.3V, and loading 1A causes the instantaneous voltage to drop 0.1 to 0.2v. This phenomenon causes problems with the system. Is there a way to solve it with additional circuits?
Thanks
Part Number: TPS22916 Hello：
Please assist in conducting a review of the MC project schematic about TPS22916,
Due to the urgency of the project, we hope to receive feedback as soon as possible
Part Number: TPS22916 Hi team,
Could you help check if we get recommendation meet following spec requirement?
Load Switch
3.6V
VDD
1.0V ~ 5.5V
Vout
0V ~ 5.5V
R…
Part Number: TPS22916 Subject: High current when the component is illuminated by an incandescent lamp
Hello, We believe we have found a flaw in the specifications of the TPS22916. Datasheet "SLVSDO5F – JULY 2017 – REVISED DECEMBER 2021" Regarding the…
Part Number: TPS22916 Other Parts Discussed in Thread: TPS22810 , TPS22811 , LM7310 Tool/software: For my wearable project I assume to use TPS22916BYFPR for switching the Resistor Voltage Divider (RVD) for 3x Zinc-Air (Energizer 675) cell ADC voltage…
Part Number: TPS22916 Other Parts Discussed in Thread: TPS22914 Hi,
I want to design a circuit for battery charge and solid switch for system turn on/off,
1. when without USB_5V, than user use solid switch to on/off system.
2. when solid switch…
