Part Number: TPS22941 Tool/software: Hello,
In other topics at E2E, I've read that TPS2294x does not have reverse current blocking feature. In datasheet, section 9.1.3, it says the following:
If the voltage at the VOUT pin is larger than the VIN…
Part Number: TPS22941 Hello team,
I have a rudimentary question about current limit.
In the datasheet, the current limit is listed as min, typ. and max, but does this mean that the maximum current that can flow is 80mA?
For example, if 65mA is applied…
Part Number: TPS22941 Hello,
Was this part ever marked as "4AL", datasheet list this as "4AN".
The TI part marking search didn't show any parts with the 5 pin package.
https://www.ti.com/packaging/docs/partlookup.tsp#divline
Part Number: TPS22941 Hi TI expert
We have an existing PCB used for industrial IoT powered by 3.6V non-rechargeable battery. We intend to use TI current limiter IC TPS22941 for limiting current to 40mA and have revised our schematic. Appreciate if you…
Part Number: TPS22941 Hi Team,
When testing the load switch of TPS22941, the result is over the max value in datasheet. Testing two pcs and the result is 81mA, 84mA. Blow is the test condition:
1.Vin=3V,
2.Vout is connected to electronic load. With…
Part Number: TPS22941 Hi,
I am unable to find conclusive information about this, I would appreciate a clarification if possible.
In my application I have a 5V regulator, and I need to individually distribute/control its output voltage to 4 separate…
Part Number: TPS22941 Hi team,
For tps22941/2/3/4/5, If current exceed the limit current, they will enter into constant current mode. However I can't see the current value in constant current mode. So what is the current value in constant current value…
Part Number: TPS22941 Hello,
We use two TPS22941 on the same custom board. and we have measured the limit current on both component when the signal OC is active LOW. The same schematic and Test setup is used for both component.
For the first component…
Part Number: TPS22941 Other Parts Discussed in Thread: TPS24750 Hi,
We got a question from customer about current limit accuracy of Load SW
Could you help us?
Do the current limit accuracy values of the following products include resistance errors…
