Part Number: TPS22968-Q1 Tool/software: Hello,
Could you help determine what is the ON pins (pin 2, 4) logic voltage thresholds are with 5.0V Vbias and 3.3V Vbias.
The datasheet, section 7.3 seem to only have operating min max range and unclear which…
Part Number: TPS22968-Q1 Tool/software: Dear Team,
We are using the module TPS22968NQDMGTQ1 in our new design. Project Application : Telematics ODB Dongle Please find the schematics section attached.
Please review it and share your feedback with us
Part Number: TPS22968-Q1
Tool/software:
Table 1 (Rise Time Table) in the TPS22968-Q1 datasheet (Rev B) doesn't appear to correlate with the slew rate equation. The datasheet shows as follows:
However, if I calculate the table based on the slew…
Part Number: TPS22968 Tool/software: Hello ,
We are using switch --> TPS22968QDMGRQ1 in our design to switch 3.3V to peripherals on the board (RAM, FLASH etc) .
That means our peripherals will be enabled only when microcontroller is flashed (PS1_EN…
Part Number: TPS22968 Recently I've had some luck finding alternative parts, but I'm having some trouble on this one and wanted to see if anyone had recommendations of pin-identical parts (or how to find them within TI's catalogue).
Any help…
Part Number: TPS22968 Hi Team,
Our customer connect BIAS to VIN, which is normally 3.3V. When doing power down test, after detect Vin lower than 2.5V, ON pin will set to LOW to disconnect the circuit, so BIAS will lower than 2.5V during the test. But…
Part Number: TPS22968-Q1 Other Parts Discussed in Thread: TPS22916 , TPS22918-Q1 , TPS22976 , TPS22810-Q1 , TPS22919-Q1 , TPS22919 , TPS22918 , TPS22990 Hi TI Team,
I want to use Load Switches in My Application. But in Most of the Switch Datasheets along with…
Part Number: TPS22968
Hi Sir,
My customer would like design TPS22968.
Would you please review schematic and layout and provide your comment?
Design material
Password: ti
BR,
SHH
