Part Number: TPS22971
Tool/software:
Hi ti team，
There are two inconsistent pieces of package dimension information in the datasheet of TPS22971, as shown in the following figure. Could you please tell me which one is correct?
Part Number: TPS22971 Other Parts Discussed in Thread: TPS22999 Tool/software: Hi
Intended to output 0.77V of VCCST rail, which the input from VCCPRIM_VNNAON 0.77V. Based on Panther Lake platform, the current consumption of VCCST would be 0.5A. Do you…
Part Number: TPS22971 Other Parts Discussed in Thread: TPS22950-Q1 Tool/software: Hello Expert,
May I know if TPS22971 have the Current limit or OCP function? If not, could you pls kindly help suggest other proper devices which have OCP or Current limit…
One other point - this part has a quick output discharge feature which might help avoid reverse current if the switch is disabled in time.
The devices with RCP tend to have Rdson that is too high for my application, so my fallback would be to use regulators…
Part Number: TPS22971 Hi Sir,
Our Customer want to survey the Load switch Turn on minimum time is zero. (EN connect to VIN remove CT)
Could you please share the device for me?
Hugo
Part Number: TPS22971 I am using the TPS22971 load switch in a custom card we have designed. From testing 6 of these cards, 2 of them we have found to have faulty POWER GOOD outputs after some time testing; meaning the output was initially working fine…
Part Number: TPS22971 Other Parts Discussed in Thread: TPS22920 Hi,
Customer need to control the ON pin with a opposite logic. mean low to open, high to close. Does TI have this kind device? or any other solution .
their Scenarios is 0.65V2A. Inverter…
Part Number: TPS22971 Hello, Our power supply circuit is configured using TPS22971YZPT.
However, the configuration does not use the PGOOD terminal. Please tell me the terminal processing of the PG terminal (C1 PIN) when the PGOOD terminal is not used…
Part Number: TPS22971 Hello E2E,
Can you tie the PG pin directly to Vout? In other words, can a customer lay out a copper pour to cover A1, B1, and C1? On startup, would there be issues with the output being able to charge up while PG is low (internal…
