Part Number: TPS23525 Other Parts Discussed in Thread: LM5050-1 , LM5069 Tool/software: Hello，
The customer is using TPS23525. The input voltage is positive 48V. As shown in the figure below, if 48V is connected to -48V_A in the diagram and GND is connected…
Part Number: TPS23525 Other Parts Discussed in Thread: TPS2400 HI,
Since there is no answer in the thread below, I created a new thread with a different parts number.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management…
Part Number: TPS23525 Hello,
The customer used TPS23525PWT to build a hot swappable slow start circuit, which is used on a 48V DC backplane. When the A board is working normally on the backplane, if the B board is inserted into another slot on the backplane…
Part Number: TPS23525 Hello.
We are conducting an experiment on an ORing circuit using the evaluation board TPS23525EVM-815.
With a constant voltage of -40V applied to the A input, we have gradually increased the voltage on the B input to see if there…
Part Number: TPS23525
Tool/software:
Hi,
Test the OV pin with an oscilloscope, and there is noise（pulse width less than 1us） present.
1. Can OV event trigger the timer, and only turn off the output when times out.
2.According datasheet,OV pin…
Part Number: TPS23525 Other Parts Discussed in Thread: TPS2411 , LM74800-Q1 Tool/software: Hello, I am looking for a power path selector similar to the TPS23525 but I need it to work for +48v instead.
We will have two +48V inputs that need to supply…
Part Number: TPS23525 Tool/software: Hi Team,
Can the OV/UV protection function of TPS23525 OV/UV be turn off? When we do hot swap testing, OV/UV turn on to interrupt the testing.
Test flow: When the system supply by 48V power card originally and…
Part Number: TPS23525 Hi Sir,
currently. the customer TPS23525 main GATE has no signal problem, but because it has same waveform as Figure_34 in SPEC.
may we know what cause such a protection mode? thanks for your help and learn from you.
customer…
Part Number: TPS23525 Tool/software: I'd like to use the TPS23525 with only one of the ORing inputs used and I'd like to know how to connect the unused pins. If input B is the unused ORing input, do I simply connect Neg48B to VEE and leave GATEB floating…
