Part Number: PMP20859 Other Parts Discussed in Thread: TPS2372 We have successfully implemented a dual PoE & external 48V input based on the PMP20859 reference circuit, which works fine. External 48V in only, works. PoE swapping over works no glitches…
Part Number: TPS2372-4EVM-006 Other Parts Discussed in Thread: CSD19538Q2 , TPS2372-3EVM-757 Hi TI Team,
I am planning to use TPS2372-4EVM-006 evolution board as reference for my design. Nowadays, it is hard to find FDMQ8205A or alternative part.
I have…
Hi Raymond,
Since we have not got your update for a relative long time, I will close this thread for now. Please open a new thread if you have any further questions.
Best regards,
Diang
Part Number: TPS2372 dear
Why PD chip TPS2372 according to the specification parameters set 4 Class 8, power supply is not normal, detection only 2. The resistance value is increased to 2 times before the level 8 can be detected.
any advice?thanks in a…
Part Number: TPS2372 Hi
On our base station we have PD TPS2372-4RGW with Ls1046A CPU and Aquantia Phy .we have two assembly options:
1 support class 4 up to 30W RCLS1 63.4 ohm and RCLS2 63.4 ohm
support class 5 up to 45W RCLS1 63.4 ohm and RCLS2 1.21K…
Part Number: TPS2372 Other Parts Discussed in Thread: PMP20869 , TPS23751 , PMP20859 We are implementing a dual input redundant PoE supply, as in the PMP20869 evaluation board, making use of the Automatic MPS operation of TPS2372. The two off TPS2372's…
Hi Diang
In the TPS2372-3RGW datasheet, it is mentioned that the Class 5 MINIMUM POWER AT PD (W) is 25.5W, but here the PD Input Power (Min) is marked as 40W, which of these two is correct?
Part Number: TPS2372 Other Parts Discussed in Thread: TPS23730
A family of our products use the TPS2372-4 configured as Class 7. T he TPS2372-4 is currently not available. It turns out that many of the product models do not exceed Class 6 power levels so…