Part Number: TPS2372-4EVM-006 Other Parts Discussed in Thread: TPS2372 Hi,
I designed a custom pcb for testing POE power, I couldn't get power from output. I get 50V for 1 second then power goes down. Also, TPL indication led is blinking. I attached…
Part Number: TPS2372-4EVM-006 We bought four TI boards but three boards are not functioning i gave 48V to ti board through RJ45 cable but i didn't get output voltage,even there no voltage across the J7 connector.
Part Number: TPS2372-4EVM-006 Other Parts Discussed in Thread: CSD19538Q2 , TPS2372-3EVM-757 Hi TI Team,
I am planning to use TPS2372-4EVM-006 evolution board as reference for my design. Nowadays, it is hard to find FDMQ8205A or alternative part.…
Part Number: TPS2372-4EVM-006 Other Parts Discussed in Thread: TPS2372-3EVM-757 , BOOST-PSEMTHR-007 , TPS23881EVM-008 , USB2ANY Hi,
I'm looking for a POE Splitter and POE Injector for our application. The POE Injector, would work by taking 48V from…
Part Number: TPS2372-4EVM-006 Other Parts Discussed in Thread: TPS2373 Hi ti support team,
My name is Rosario Mendez from MHT Lighting and we use this chip on our 90W Node product line working the PoE standard IEEE802.bt.
We also have another 60W…
Part Number: TPS2372-4EVM-006 Hi,
I have some questions about TPS2372-4EVM-006 as below.
1. Does the EVM support IEEE802.3bt type 4 ?
2. Does BR_OFF signal need to be controlled from an external MCU ?
3. Can I change Q1 and Q4 as below to save…
Part Number: TPS2372-4EVM-006 Hi All,
I'm testing the TPS2372-4EVM-006 set at Class 6 with an application which takes 41.5w. I have used a BT injector to power up the TPS2372-4EVM-006 and the 41.5w application with a 100m Cat 5 cable. In order to do…
Part Number: TPS2372-4EVM-006 Hi,
I have a TPS2372-4EVM-006 evaluation module for testing. I would like to know the following information regarding the same.
1) Can the board configured as a PD controller with dual-signature. If yes, what are the…
