Part Number: TPS2411 Tool/software: Hi all,
I'm using TPS2411PWR to OR a 12V power supply from a PoE power module and a 24V power supply from an AC adapter. When the 12V power supply from the PoE power module is OFF, if 24V is supplied from the AC adapter…
Part Number: TPS2411 Other Parts Discussed in Thread: UCD3138PSFBEVM-027 Tool/software: Good morning Mr. Shiven Dhir this is the question you had asked me some time ago .
"
TPS2411 is rated for 16.5V. Are you trying to scale down 600V to ~12V for…
Part Number: TPS2411 Other Parts Discussed in Thread: LM74800-Q1 Tool/software: Hi Sir,
may we know if there is higher specficaiton for Vin rating in the TPS2411 series?
we want to replace the competitor LTC4418. thanks.
Part Number: TPS2410 Other Parts Discussed in Thread: TPS2411 Hi ，
TPS2411PWR is in short supply now, we want to change to TPS2410.
TPS2410 can provide linear start control function, TPS2411 has switch control method, what is the difference between…
Part Number: TPS2411 Other Parts Discussed in Thread: LM74800-Q1 , LM7480-Q1 , TPS24740 Hello:
I am interested in using the TPS2411 for power OR-ing our device which must meet a special case. I wanted to ask TI for directions on how to use the TPS2411…
Part Number: TPS2411 Other Parts Discussed in Thread: UCC23513
Dear Team,
The customer seems have driving issue for 8 MOS here.
Do you have any suggestion to drive 8 MOS here?
Is using UCC23513 a good solution here?
http://www.mouser.com/ds…
Part Number: TPS2411 Other Parts Discussed in Thread: LM74700-Q1
Hi,
From the datasheet of TPS2411, the gate source current is only 300uA. So the Oring FET turning on speed is very slow, especially for multi FETs in high current application. The long…
Part Number: TPS2411 Hi there,
My customer is designing with TPS2411 and I'm reviewing the schematic.
I found that the turnoff threshold is set at about 0.14mV with RSET pulled down with a 150kohm resistor (R7189).
However, the datasheet states…
