Part Number: TPS24711 Hi,
Please check with our schematic diagram that the output waveform is abnormal, thanks.
TPS24711DGSR.pdf
The output waveform:
The out
Part Number: TPS24711 Tool/software: The Gate pin of the TPS24711 is equipped with an external MOS. The S terminal of the MOS corresponds to the 12V output. Now I short-circuit the 12V output. After the output power is lost, the Gate pin has a level of…
Part Number: TPS24711 Hi Team,
This is FAE Jayden, my customer O-net is using TPS24711 in their new design. But recently they found a strange phenomenon in their design.
Customer measured that the waveform at the OUT pin of the TPS24711 will appear…
Part Number: TPS24711 Dear Team,
1. What is the impact of PROG capacitor (C1820) on slow start up?
2. Can you provide a comparison between the calculated value and the measured value of the MOS power limit value?
3. If we want to refresh the program…
Part Number: TPS24711 Dear Team,
Regarding the chip TPS24711DGSR, the corresponding MOS model used is CSD16415Q5T. I would like to ask how to set the PROG value specifically and what standards should the power limit setting meet? Can you help me list…
Part Number: TPS24711 Hi Team
Merry Christmas!
Customer is using TPS24711 as switch in their latest telecom PSU which need to pass 6KV CM surge test. our device performs nice and pass it. customer's second source is SGM's SGM 25711 B , it will be…
Part Number: TPS24711 Hi Team,
if we want to limit the negative spike on OUT pin, we need to add one diode close to Source of MOS and OUT pin connected to cathode of diode, right? Thanks
BRs
Given
Part Number: TPS24711 Hello Team,
Posting on hebalf of my customer:
when in circuit breaker mode, what will the IC do if the current goes below the OCP threshold? Will it pull the gate to GND or it just ignores the OCP?
Thanks in advance.
Kind…
Part Number: TPS24711 Hi Team,
in datasheet, there is -0.3V to +0.3V spec on Vcc-Vsense.
But during actual application, we found there is spike due to oscillation of parasitic inductance and Vcc cap. So there is +/-1V(~120ns) spike, please kindly…
