Part Number: TPS24713 Hi ,
Why my TPS24713 can only carry 1A loads, in my diagram, PIN 10 and PIN are suspension, do they have any impact on the outputs?
thank you!
Part Number: TPS24713 Other Parts Discussed in Thread: TPS25985 Dear team,
One of our customers is using 12V, 1000W design in industrial router project and consider using our hot-swap controller. The normal working situation of the MOSFET will have…
Ken,
I will look into further, and provide partial thoughts here. For sure, the internal clamp is spec'd at 10uA conditions, with the clamp level near 28v worst case. This is near the 30v max rating on gate. During fault conditions, trace input inductance…
Part Number: TPS24712 Tool/software: I would like to ask if any modifications are needed for the calculation sheet related to the schematic. For your reference, I’ve attached the backend 12V_EDGE specification, noting that the backend device uses a 35W…
Patrick,
TI has a number of hotswap ICs that will handle 12v/15A. The TPS24700/01, TPS24710/11, TPS24720 can do this and have EVMs build for 25A applications that are easily scaled as you need. Please see www.ti.com/hotswap for selection and design…
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
Gary,
Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.
Regards,
John
