Part Number: TPS24751
Tool/software:
Hi Team,
We have designed the hot-swap circuit for a 10 A output current . However, during testing with a load, the hot-swap turns off at varying output current levels. Please refer to the attached schematic…
Part Number: TPS24751 Tool/software: Hi team we are using the TPS24751 for E fuse monitoring
Our thershold limits are given Below
OV:5.25V
UV:4.75V
Current limit:6.6A
I have calculated by using the formula present in data sheet I am getting…
Part Number: TPS24751 Tool/software: Hi team,
Kindly review the attached schematics pdf file and share your feedback ASAP,
Input voltage :- 12V
Max load current:- 8A SCH_Carrier_Board (1).pdf
Part Number: TPS24751
Hello Team,
We are using TPS24751 configured as E-Fuse in one of our designs. Attached schematics.
With Cgate - 4.7nF, Ctimer - 47nF, we see 4.2A inrush current during start up. We would like to reduce it to 0.7 Amps inrush…
Part Number: TPS24751 after powering up the TPS24751, what is the min. Vcc voltage when POR circuit starts to initinate the chip and the start-up cycle is ready to take place?
data sheet shows that the POR starts after VCC exceeding +1.5V, but VCC working…
Part Number: TPS24751 Other Parts Discussed in Thread: TPS25947 Hi experts,
My customer want to relize the reverse current blocking always by using our E-fuse. Do we have the suitbale sloution which integrating internal MOSFET?
The spc. is Vin=12V…
Part Number: TPS24751 Hi TI TEAM, kindly review the EFUSE section.
/cfs-file/__key/communityserver-discussions-components-files/196/SCH_5F00_TI_5F00_E_2D00_FUSE-_2800_1_2900_.pdf
Hi Kerem Öktem ,
The approach for power muxing and device chosen looks fine.
Please note that :OV pin is used to program the device overvoltage level. A voltage of more than 1.35 V on this pin turns off the internal FET. A resistor divider connected…
Part Number: TPS24751 Hey,
I am trying to use the TPS24751 for 10A e-fuse circuit,
List of problems we are facing:
1- When we are shorting the O/P side IC is blowing up and not entering in Short circuit protection.
below I am attaching the Schematic…
Part Number: TPS24751 Hello experts,
Our customer reported the below issue.
In the function test station, they tested 29 pcs of PCBA. 7 pcs of PCBA failed. They tested the U19(TPS24751RUVR). Vout had no voltage output. The normal voltage should be…
